RC 4WD Yota II Ultimate Scale Cast Axle Rear

Below is an additional thing that compliments the thing being talked about.

Yota II Ultimate Scale Cast Axle Front

This is the RC4WD Yota II Ultimate Scale Front Axle.

FEATURES:
Created for 1/10 scale off-road trucks such as the RC4WD Path
    Finder 2*, and the Gelande II
Pass away cast lightweight metal real estate with black powder coat surface
Hardened steel spindle gears
5mm axle output shaft
Assembled and prepared to set up
Full ball bearings

CONSISTS OF:
RC4WD Yota II Ultimate Scale Front Axle

SPECIFICATIONS:
Total Width: 7.67" (195mm)
Gear Ratio: 2.67:1
Weight: 5.85oz (166g)
Width at Center of Installing Tabs: 3.11" (79mm)
Range from Diff Cover to Output Shaft: 2.08" (53mm)

COMMENTS:
*When setting up on the Path Finder II, the Z-S0938 Steering Link
    Set (RC4C0938) needs to be installed

This thing is frequently purchased with the above mentioned thing.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building and construction
Created to fit the Yota II axles on the RC4WD Path Finder II

CONSISTS OF:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
Four M3 x 15mm Set Screws (Z-S0650)
Four M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECIFICATIONS:
Weight: 0.5oz (14g)

This is a amazing enhancement to the thing presently being talked about.



This is the RC4WD SCX10 Yota II 3 Link & Panhard Mount.

FEATURES:
Permits the setup of the Popular Yota II axles under SCX10
    based trucks
Created for the longer 313mm (12.3") wheelbase SCX10 trucks like
    the Honcho, Rubicon and G6
Constructed of CNC machined billet aluminum

CONSISTS OF:
All Links and Mounts, Plastic Rod Ends, Spacers, Hardware and
    Directions

NEEDS:
Yota II Ultimate Scale Cast Axle, Rear (Z-A0081)
Yota II Ultimate Scale Cast Axle, Front (Z-A0080)
Yota II Steering Link Set (Z-S0938)
Chassis Mounted Steering Servo Kit with Panhard Bar for Axial
    SCX10 (Z-S0923)
Front Bumper Mount for Axial Jeep Rubicon (Z-S1105)
    (Just needed for Axial SCX10 Rubicon Kit)"