RC 4WD Wired Winch Control Unit

This is the Wired Winch Controller from RC4WD.

FEATURES:
Suitable with the RC4WD #Z-S1079 Alerted 9.5cti RC4C1079
    and #Z-E0011 Bulldog winches
Permits winch control from the 3rd channel of the car's
    transmitter*
2 & 3 cell LiPo suitable
Runs on 6-11.1V
Easy plug and play operation
Thirty day minimal guarantee through RC4WD beginning at date of
    purchase

CONSISTS OF:
Wired Winch Controller
6" Receiver/Receiver Power Wire
6" Receiver/Winch Control Wire

SPECS:
Measurements: 1.63 x 1.22 x 0.4" (10.3 x 41.5 x 31mm)
Weight: 0.35oz (10g)
Wire Length: 6" (150mm)
Wire Weight: 0.35oz (10g)

COMMENTS:
*Third channel needs to be a 3 position switch (on/off/on).
This controller is not waterproof.
Alternative to this unit is a wireless controller RC4C1092 which
does not need a 3 channel radio

This product is often purchased with the above pointed out product.



This is the RC4C 1/10 scale Warn 9.5cti Winch.

FEATURES:
Designed for use on 1/10 scale RC spiders
Runs on 6-11V battery, can run on THREE LiPo battery
Working spring filled Warn hook with 3' (.9m) synthetic winch rope
Cast aluminum case
Stamped steel components
Quickly rebuildable
Same mounting places as Bulldog winch
1 Month minimal guarantee beginning at date of purchase

CONSISTS OF:
RC4C 1/10 scale Warn 9.5cti Winch
Four M2.5x4mm Socket Head Cap Screws
Four M2.5x6mm Socket Head Cap Screws
Caution Decal
Working spring filled Warn hook with 3' (.9m) synthetic winch rope

NEEDS:
Wireless Winch Controller Set, RC4C1092 (links directly to a
    battery) OR
Wired Winch Control Unit, RC4C1089 (usages radio's 3rd channel)
Axial SCX10 Chassis mounting requires RC4C1160 Winch Bumper

SPECS:
Length: 2.9" (73.68mm)
Total Width: 1.25" (31.75mm)
Height: 1.31" (33.56mm)
Weight: 2.1oz (60g)
Load Limitations: Dead Lift 6.6lbs (3kgs)
Load Limitations: Rolling Drag 9lbs (4.1kgs)

COMMENTS:
Warn and the Warn name are registered hallmarks of Warn Industries.
The Warn logo is property of Warn Industries.

This is a amazing enhancement to the product currently being reviewed.

LED Lighting Kit for Cars and Trucks 1/10th Scale and Smaller

Provide your car or truck a scale look with true scale performance without spending tons of cash or time. This LED Package features a complete set of fully-functional LEDs that respond to your transmitter inputs - struck the brakes and your tail lights will go bright, turn left or right and the turn indications will blink on and off, even the reverse lights and high beams respond when you punch the throttle in either direction.  Most importantly, this package is extremely easy to install and use. Everything you require comes included and all the components are 100% plug-and-play, no soldering required.

Includes:
(1) Control Box
(1) Red LED Lights
(3) White LED Lights
(2) Orange LED Lights
(1) Receiver Connection Cable

Specifications:
Orange LED Lead Length: 21 in.
White and Red LED Lead Length: 15. in
Receiver Cable Length: 11.8 in