RC 4WD Superlift Superide 100mm Scale Shock Absorbers

This is a pair of 1/10 scale Superlift Off-Road 100mm Racing Shocks from RC4WD.

FEATURES:
CNC machined billet aluminum building and construction with white painted surface
Internal spring design

CONSISTS OF:
Two Superlift Off-Road 100mm Racing Shocks

REQUIRES:
Shock Boots
    Black Rubber Boot Z-S0891, RC4C1891
    Red Rubber Boot Z-S0948
    Yellow Rubber Boot Z-S0962
    Blue Rubber Boot Z-S0961

SPECIFICATIONS:
Hole to Hole (Compressed): 2.85" (72.5mm)
Hole to Hole (Uncompressed): 3.93" (100mm)
Overall Length: 4.29" (109mm)
Travel Length: 1.22" (31mm)
Shock Body: 0.39" (10mm)
Shaft Diameter: 0.13" (3.4mm)
Stickers Specs (Length): 1.26" (32mm)
Stickers Specs (Width): 0.33" (8.6mm)
Weight: 0.49oz (14g)

REMARKS:
Superlift is a signed up trademark of the Superlift Suspension
    Systems. The Superlift logo is property of Superlift Suspension
    Systems.

This item compliments the above gone over item.

Super Scale Shock Boot Black

These are the Super Scale Shock Boots in Black
for the RC4WD ARB and Superlift Shocks.

FEATURES:
Rubber building and construction
Flexible accordion design
Protect exposed shock shafts against dirt, mud and rocks

CONSISTS OF:
4 Super Scale Shock Boots in Black

SPECIFICATIONS:
Length: 1.63" (41.4mm)
Outer Diameter: 0.512" (13.01mm)
Upper Inner Diameter: 0.394" (10.01mm)
Lower Inner Diameter: 0.236" (6mm)

Below is one more item that compliments the item being gone over.



This is the RC4WD Steering Linkage set for the Yota II Axles.

FEATURES:
CNC machined aluminum building and construction
Developed to fit the Yota II axles on the RC4WD Trail Finder II

CONSISTS OF:
4.1" (103.5mm) Yota II Steering Link Set (Black)
3.9" (100.5mm) Yota II Steering Link Set (Black)
4 M3 x 15mm Set Screws (Z-S0650)
4 M3 Offset Short Plastic Rod Ends (Z-S0401)

SPECIFICATIONS:
Weight: 0.5oz (14g)

This item compliments the main item right here.



This is the optional RC4WD Chassis Mounted Steering Set with Panhard Bar
    for the Axial SCX-10 Honcho, Jeep Rubicon and Dingo.

FEATURES:
Converts guiding servo from axle mounted to chassis mounted with a
    panhard setup
CNC machined aluminum building and construction
Lightweight at just 2.64oz (75g)

CONSISTS OF:
Receiver Box Mount (Black)
Servo Mount (Black)
Panhard Bar Axle Mount (Black)
64mm Link (Gray)
69mm Link (Gray)
78mm Link (Gray)
5 M3 x 6mm BHCS (Black) (Z-S0651)
Six M3 x 8mm BHCS (Black) (Z-S0652)
Two M3 x 10mm BHCS (Black) (Z-S0653)
4 M3 x 12mm BHCS (Black) (Z-S0654)
Two M3 x 16mm BHCS (Black) (Z-S0656)
Two M3 x 20mm BHCS (Black) (Z-S0895)
5 M3 x 8mm FHCS (Black) (Z-S0649)
Two M3 x 14mm SHCS (Black) (Z-S1055)
Two M3 Brief Bent Plastic Rod Ends (Z-S0402)
Two M3 Medium Straight Plastic Rod Ends (Z-S0399)
Six M3 Mini Plastic Rod Ends (Z-S0398)
Eight M3 x 15mm Threaded Rods (Z-S0650)

REMARKS:
Includes additional link for use on the Axial Dingo package

Below is a terrific item that lots of others have purchased the very same time.

Standard Size Metal Gear Analog Servo, Torque/Speed 142/.16 @6V

This is a standard size, ball bearing, metal gear servo by Rage RC.

Specs
Size: 40.8 × 20.1 × 38 mm
Weight: 56 g
Operating Speed: 0.18sec/60degree (4.8V), 0.16sec/60degree (6V)
Stall Torque: 9kg.cm/125.2oz.in(4.8V), 10.2kg.cm/141.9oz.in(6V)
Bearing Type: 2BB
Gear Type: Metal