RC 4WD Marlin Crawlers Trail Finder 2 RTR w/Mojave

This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale, Ready to Run
RC4WD Marlin Crawlers Trail Finder 2 w/Mojave II Spider Body Set.

FEATURES:
Chassis: Billet aluminum ladder frame with adjustable shock hoops,
    servo installs and hard body installs
Drive: Four wheel steel universals and new plastic shaft for severe
    driveline angles, Hammer transfer case with cast metal exterior
    .8 Mod expanded equipments,
Driveshafts: Plastic with steel yokes
Axles: Cast Yota II 8° round knuckles, detachable diff covers,
    lower mounting points and a compact front offset pumpkin
Transmission: R3 single speed
Radio: 2.4GHz XR3 3-channel pistol grip, 3rd channel can be used
    to manage devices such as a winch (not included)
Steering Servo: Tornado high torque metal equipment digital, 153oz/in
    of torque at 6V
Electronic Speed Control: Outcry II waterproof, integrated drag brake
Battery: 6-cell 3000mAh NiMH with Standard connector
Battery Charger: 110V wall battery charger
Motor: 540 size brush equipped 45 turn, sealed endbell for increased
    sturdiness
Motor Mount: 10 position adjustable
Differentials: Locked
Suspension: Real to scale leaf spring
Shocks: Ultimate scale internally sprung, machined billet aluminum
    construction, completely rebuildable
Wheels: TRO stamped steel beadlock, 12mm hex, 0.98" (25mm) wide
    1.9" (50mm) outer diameter, six lug style
Tires: Interco IROK 1.7" X2SS soft and sticky compound
Body: TF2 Marlin Spider with pre-painted wipers, mirror, light
    information, door handles and control panel
Bumpers: Marlin Crawlers tube design

CONSISTS OF:
Put Together Marlin Crawlers Trail Finder 2 w/Mojave II Spider Body
    Set, 3-ch Radio System, ESC, 45T Brushed Motor, Guideline
    Handbook, four AA Batteries

REQUIRES:
Track and Maintenance Equipment

SPECS:
Automobile;
Wheelbase: 11.3" (287mm)
Width: 20" (512mm)
Height: 9" (230mm)
Ground Clearance: 2.83" (72mm)
Final Drive Ratio: 31.9:1
Weight: 6.45pounds (2.93kg)

    R3 Single Speed Transmission;
Ratios Pinion/Spur 14/64 = 4.57:1
Internal Ratio = 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch

    Cast Yota II Axles
Ratio: 15/40 = 2.67: 1
Width at Hex: 180.5mm

    Body;
Length: 17.5" (444mm)
Width: 7.2" (183mm)
Height: 5.2" (132mm)

REMARKS:
Transmission and axles are preassembled, and the maker does
    not state the size of ball bearings used in each component.