RC 4WD Marlin Crawlers Trail Finder 2 RTR w/Mojave

This is the Electric Powered, 2.4GHz Radio Controlled, 1/10 scale, Ready to Run
RC4WD Marlin Crawlers Path Finder 2 w/Mojave II Crawler Body Set.

FEATURES:
Chassis: Billet aluminum ladder frame with adjustable shock hoops,
    servo mounts and difficult body mounts
Drive: 4 wheel steel universals and new plastic shaft for extreme
    driveline angles, Hammer transfer case with cast metal exterior
    .8 Mod widened equipments,
Driveshafts: Plastic with steel yokes
Axles: Cast Yota II 8° round knuckles, detachable diff covers,
    lower installing points and a compact front balanced out pumpkin
Transmission: R3 single speed
Radio: 2.4GHz XR3 3-channel handgun grip, third channel can be used
    to control devices such as a winch (not included)
Guiding Servo: Twister high torque metal gear digital, 153oz/in
    of torque at 6V
Electronic Speed Control: Outcry II water resistant, built-in drag brake
Battery: 6-cell 3000mAh NiMH with Standard connector
Battery Battery charger: 110V wall charger
Motor: 540 size brush geared up 45 turn, sealed endbell for increased
    sturdiness
Motor Mount: Ten position adjustable
Differentials: Locked
Suspension: Real to scale leaf spring
Shocks: Ultimate scale internally sprung, machined billet aluminum
    building and construction, totally rebuildable
Wheels: TRO stamped steel beadlock, 12mm hex, 0.98" (25mm) wide
    1.9" (50mm) outer size, six lug style
Tires: Interco IROK 1.7" X2SS soft and sticky compound
Body: TF2 Marlin Crawler with pre-painted wipers, mirror, light
    information, door handles and dashboard
Bumpers: Marlin Crawlers tube style

CONSISTS OF:
Put Together Marlin Crawlers Path Finder 2 w/Mojave II Crawler Body
    Set, 3-ch Radio System, ESC, 45T Brushed Motor, Guideline
    Manual, four AA Batteries

NEEDS:
Track and Upkeep Equipment

SPECS:
Vehicle;
Wheelbase: 11.3" (287mm)
Width: 20" (512mm)
Height: 9" (230mm)
Ground Clearance: 2.83" (72mm)
Last Drive Ratio: 31.9:1
Weight: 6.45pounds (2.93kg)

    R3 Single Speed Transmission;
Ratios Pinion/Spur 14/64 = 4.57:1
Internal Ratio = 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch

    Cast Yota II Axles
Ratio: 15/40 = 2.67: 1
Width at Hex: 180.5mm

    Body;
Length: 17.5" (444mm)
Width: 7.2" (183mm)
Height: 5.2" (132mm)

COMMENTS:
Transmission and axles are preassembled, and the maker does
    not state the size of ball bearings used in each element.