RC 4WD Interco IROK 2.2 Super Swamper Scale Tires (2)

This is a pair of Interco IROK 2.2 Super Swamper Scale Tires
and Foam Inserts from RC4WD.

FEATURES:
Advanced X2 SS compound (very soft & very sticky)
Suitable efficiency in rocks, mud and snow
Fits 2.2" wheels just

INCLUDES:
Two Interco IROK 2.2 Super Swamper Scale Tires and Foam Inserts

REQUIRES:
Tire Glue, if not using beadlock wheels

SPECIFICATIONS:
Outer Diameter: 5.75" (146mm)
Width: 2.25" (57mm)
Inner Diameter: 2.04" (52mm)
Weight: 5.4oz (153g) each tire

The listed below item likewise sets actually well with the item being talked about.

2.2 Comp Beadlock Wheels XR10

This is a pair of 2.2 VWS Beadlock Wheels for the Axial XR10 Rock Crawler.

FEATURES:
Black laser etched beadlock rings
Suitable with Vanquish Products wheel weight systems
Minimal beadlock hardware for assembly ease
Slim offset increases guiding response and strength

INCLUDES:
Two Axial 2.2 VWS Beadlock Wheels

REQUIRES:
Tires

SPECIFICATIONS:
Diameter: 2.2" (56mm)
Width: 1.7" (43mm)
Hex Size: 12mm

Right here is a fantastic item that many others have actually bought at the same time.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, built of very strong composite product
Gray aluminum ring
Fits 12mm hex hubs
Real beadlock design, no untidy gluing needed

INCLUDES:
Two Axial 2.2 Beadlock Wheels in Black with ring installing hardware

REQUIRES:
Tires of modeler's option

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Diameter: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

You will certainly love this product if you have the product previously stated.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For use with the #AX30546 (AXIC0546) Wheel Weight Inserts
Adds weight to increase stability on challenging obstacles
Recommended for use on the front wheels to help with climbing up by
    decreasing the center of mass
Steel building

INCLUDES:
2.2 Internal Wheel Weight Sounding with Installing Hardware

REQUIRES:
Attaching to wheel with included hardware

SPECIFICATIONS:
Weight of Each Ring: 2oz (57g)

This item is often acquired with the above pointed out item.



This is the ST Racing Ideas Sturdy Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FUNCTIONS:
The stock plastic steering linkage on the Axial Wraith is a typical
problem of powerlessness on this automobile, as the stock pieces tend to
be careless and weak in transferring the torque and power coming from
the guiding servo. Our CNC Machined Aluminum Steering link features
7mm thick aluminum tubes for lower and upper steering links. The
upper link features a slight bent that enables all the power and
torque from the servo to be moved in a perpendicular angle to
the arm of the knuckle to make sure no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One short link tube
Four M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECIFICATIONS:
Long link, length: 6-7/16" (164mm)
diameter: 7mm (9/32")
Brief link, length: 2-3/4" (70mm)
diameter: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
straight ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)