RC 4WD Interco IROK 2.2 Super Swamper Scale Tires (2)

This is a set of Interco IROK 2.2 Super Swamper Scale Tires
and Foam Inserts from RC4WD.

FEATURES:
Advanced X2 SS compound (super soft & super sticky)
Perfect performance in rocks, mud and snow
Fits 2.2" wheels just

INCLUDES:
2 Interco IROK 2.2 Super Swamper Scale Tires and Foam Inserts

NEEDS:
Tire Glue, if not utilizing beadlock wheels

SPECS:
Outer Size: 5.75" (146mm)
Width: 2.25" (57mm)
Inner Size: 2.04" (52mm)
Weight: 5.4oz (153g) each tire

The listed below thing likewise sets truly well with the thing being talked about.

2.2 Comp Beadlock Wheels XR10

This is a set of 2.2 VWS Beadlock Wheels for the Axial XR10 Rock Crawler.

FEATURES:
Black laser etched beadlock rings
Compatible with Vanquish Products wheel weight systems
Minimal beadlock hardware for assembly ease
Narrow offset boosts guiding reaction and strength

INCLUDES:
2 Axial 2.2 VWS Beadlock Wheels

NEEDS:
Tires

SPECS:
Size: 2.2" (56mm)
Width: 1.7" (43mm)
Hex Size: 12mm

Below is a excellent thing that lots of others have actually purchased the exact same time.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
Eight hole design, constructed of super strong composite product
Gray aluminum ring
Fits 12mm hex centers
Real beadlock design, no messy gluing needed

INCLUDES:
2 Axial 2.2 Beadlock Wheels in Black with ring installing hardware

NEEDS:
Tires of modeler's option

SPECS:
Width: 1.4" (36mm)
Beadlock Size: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

You will love this thing if you have the thing just above stated.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For use with the #AX30546 (AXIC0546) Wheel Weight Inserts
Adds weight to increase stability on hard challenges
Advised for use on the front wheels to help with climbing by
    lowering the center of mass
Steel building

INCLUDES:
2.2 Internal Wheel Weight Sounding with Installing Hardware

NEEDS:
Fastening to wheel with suched as hardware

SPECS:
Weight of Each Ring: 2oz (57g)

This thing is often acquired with the above pointed out thing.



This is the ST Racing Concepts Strong Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FEATURES:
The stock plastic steering linkage on the Axial Wraith is a common
problem of powerlessness on this vehicle, as the stock pieces have the tendency to
be sloppy and weak in moving the torque and power coming from
the guiding servo. Our CNC Machined Aluminum Steering link includes
7mm thick aluminum tubes for lower and upper steering links. The
upper link includes a slight bent that allows for all the power and
torque from the servo to be moved in a perpendicular angle to
the arm of the knuckle to make sure no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One brief link tube
4 M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECS:
Long link, length: 6-7/16" (164mm)
size: 7mm (9/32")
Brief link, length: 2-3/4" (70mm)
size: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
directly ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be installed on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Set (AXID9020)