RC 4WD Interco IROK 2.2 Super Swamper Scale Tires (2)

This is a pair of Interco IROK 2.2 Super Swamper Scale Tires
and Foam Inserts from RC4WD.

FEATURES:
Advanced X2 SS substance (very soft & very sticky)
Perfect performance in rocks, mud and snow
Fits 2.2" wheels only

SUCHES AS:
2 Interco IROK 2.2 Super Swamper Scale Tires and Foam Inserts

NEEDS:
Tire Glue, if not using beadlock wheels

SPECIFICATIONS:
Outer Size: 5.75" (146mm)
Width: 2.25" (57mm)
Inner Size: 2.04" (52mm)
Weight: 5.4oz (153g) each tire

The listed below product additionally sets actually well with the product being gone over.

2.2 Comp Beadlock Wheels XR10

This is a pair of 2.2 VWS Beadlock Wheels for the Axial XR10 Rock Crawler.

FEATURES:
Black laser etched beadlock rings
Suitable with Vanquish Products wheel weight systems
Very little beadlock hardware for assembly ease
Narrow offset increases guiding reaction and strength

SUCHES AS:
2 Axial 2.2 VWS Beadlock Wheels

NEEDS:
Tires

SPECIFICATIONS:
Size: 2.2" (56mm)
Width: 1.7" (43mm)
Hex Size: 12mm

Here is a terrific product that numerous others have bought at the exact same time.



These are the Axial 2.2 Beadlock Wheels in Black.

FEATURES:
8 hole design, constructed of very strong composite material
Gray aluminum ring
Fits 12mm hex hubs
True beadlock design, no messy gluing needed

SUCHES AS:
2 Axial 2.2 Beadlock Wheels in Black with ring installing hardware

NEEDS:
Tires of modeler's choice

SPECIFICATIONS:
Width: 1.4" (36mm)
Beadlock Size: 2.2" (55.5mm)
Hex Size: 0.47" (12mm)

You will enjoy this item if you have the item earlier stated.



This is a 2.2 Internal Wheel Weight Ring from Axial.

FEATURES:
Fits all Axial 2.2" beadlock wheels
For usage with the #AX30546 (AXIC0546) Wheel Weight Inserts
Adds weight to increase stability on challenging challenges
Advised for usage on the front wheels to help with climbing by
    decreasing the center of mass
Steel building and construction

SUCHES AS:
2.2 Internal Wheel Weight Sounding with Mounting Hardware

NEEDS:
Securing to wheel with suched as hardware

SPECIFICATIONS:
Weight of Each Ring: 2oz (57g)

This product is regularly purchased with the above discussed product.



This is the ST Racing Principles Heavy Duty Aluminum Steering Linkage Set
For the Axial Wraith 1/10 Rock Racer

FEATURES:
The stock plastic steering linkage on the Axial Wraith is a typical
problem of weak point on this vehicle, as the stock pieces tend to
be careless and weak in moving the torque and power coming from
the guiding servo. Our CNC Machined Aluminum Steering link features
7mm thick aluminum tubes for lower and upper steering links. The
upper link features a minor bent that allows for all the power and
torque from the servo to be moved in a perpendicular angle to
the arm of the knuckle to ensure no power is loss in the transfer.

This linkage set is silver in color.

INCLUDES:
One long link tube
One short link tube
4 M39x16mm setscrews with 1.5mm hex socket
One M39x22mm caphead screw with 2.5mm hex socket

SPECIFICATIONS:
Long link, length: 6-7/16" (164mm)
size: 7mm (9/32")
Short link, length: 2-3/4" (70mm)
size: 7mm (9/32")

RREQUIRES:
Turnbuckle ends from the Axial Linkage Set (AXIC0057) (longer
directly ends on the part tree) and the stock ball links from
the vehicle.

COMMENTS:
This link set can be set up on
Axial Wraith Rock Racer 4WD 2.4GHz RTR (AXID9018)
Axial Wraith 4WD Kit (AXID9020)