ZAP 1Oz Z-Poxy 5 Min Syringe

This is Pacer's 5 Minute Epoxy & Hardener with the Syringe Applicator.

FEATURES:
Pacer epoxy adhesives remedy and sign up with everythings together by a chemical
    reaction in between the resin and hardener. This reaction results in
    high strength bonds that are resistant to most chemicals.
Use for household, industrial, crafts, or any job that needs
    a high-strength, top quality bond.
Best used on these products:
    -Metal & Wood
    -Concrete
    -Glass & China
    -Ceramics
Clear drying color.
Working time (time offered to mix & use product & position
    repair work): 5 minutes.
Handling time (the quantity of time repair work should remain fixed for
    product to set): 15 minutes.
Full bond strength in one hour.
PSI strength: 1,500 pounds per square inch.
Water resistant.
It is not flammable.
Working temperature level variety (when fully treated it can endure this
    temperature level variety): -40°F to +176°F.
The special applicator includes a patent pending design that makes
    it simple to dispense and mix the right amount of adhesive for any
    job. The snap off cap gets rid of unsafe cutting of television ends
    while the snap out paddle in the handle makes it simple to mix.
    Nozzle design lets even the thickest products flow easily.
    Reseals for storage.
Directions on package.

INCLUDES:
One Applicator with 5 Minute Epoxy and Hardener

SPECS:
Net Volume: 1oz (28.3g)

COMMENTS:
Not advised above 176°F (93°C). If temp is listed below 40°F, 5°C,
    (5°C), hardening time is significantly longer.

You will certainly enjoy this product if you have the product just above pointed out.



This is a 20 Gram Bottle of Zap-O Odorless CA+ Glue from Pacer.

FEATURES:
An odorless CA that truly works!
Great on styrofoam and foam, without a primer.
Medium thick, slow cure.
Works on balsa, plywood and most other hobby materials.
No-more-tears formula.
Won't fog most clear plastics.
**To cure properly, Zap-O Foam Safe CA must be used with Zap Foam
    Safe Kicker (PT28)**

INCLUDES:
One 20 Gram Bottle of Zap-O Odorless CA+ Glue.

SPECS:
20 Grams

This thing is regularly bought with the above discussed thing.



    This is the Fantastic Planes Pro CA activator with a pump.
Compatible with many foams.

For thick and medium CA that doesn't cure as quickly as the instant. All you have
to do is use the CA then spray the Activator on the CA and it cures practically
quickly. Another method is to very first use the activator to a piece of balsa
you wish to sign up with to another piece, then include CA to the other piece.
When you put them together, you have an immediate glue joint. The pump makes life
that much simpler, simply hold the bottle 4-6" far from location you are spraying
and pump one or two times and it's done.

INCLUDES:
One 2oz bottle of Activator
One pump

COMMENTS:
CARE, Constantly spray on a test spot initially, and ALWAYS use safety
    glasses.