JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.


Top Seller

Model: Vortex Hobbies JST-XH6S12
Dist. #: VTXJST-XH6S12   SKU: VTXJST-XH6S12

Customer Reviews:  5 of 5 (1 Review)

Shipping: In Stock For Shipping
Store Pickup:

West Jordan, UT
Available Now!

Price:  $3.39 + $2.99 shipping
Updated on Apr 19, 2018 07:08:35 AM

6S JST-XH Lipo Balance Wire Extension Lead (12 IN)...
This is a 6S JST-XH Lipo Balance Wire Extension Lead

Length: 12 Inches

The below thing also pairs truly well with the thing being discussed.

4S JST-XH Lipo Balance Wire Extension Lead (12 IN)

This is a FOUR JST-XH Lipo Balance Wire Extension Lead

Length: 12 Inches

Many others have acquired this thing along with the thing that you are presently checking out.

EC5 Device Connector (2)


Features



Efficient in more than 120A constant present with 10-awg wireErgonomically pleasing and easy to gripProtected to avoid shorting and reverse polaritySuperior innovation suited to today's advanced applicationsDesigned with convenience and reliability in mind




Summary


E-flite's high-quality EC5 ports need to be a staple for every single workbench. EC5 (E-flite Connector 5mm) ports, leads with ports, and devices are best for electrical power applications and work with any battery, battery charger, ESC, Power Meter, and so on. They are perfect for high power applications.

Many others have acquired this thing along with the thing that you are presently checking out.

EC5 Extension Lead with 6" Wire, 10Awg




Regularly acquired with the thing that you are presently checking out.

Servo line Color Black & Green

Seeking to clean up the look of your helicopter, aircraft of RC vehicle & secure your servo lines from chaffing? Servo Line Covering is a simple way to secure your servo wires, including a clean, visual want to your RC device, and can be set up in a matter of minutes. Select from our amazing line of diverse colors to add an entire new look to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Install Servo Line Covering?

Simply eliminate your servo(s) from the receiver, measure the length of covering you will require for your servo wire(s), and open one end of the covering and insert the servo terminal inside. It works best to "inch worm" your servo wire by holding the terminal inside the servo covering, and slowly inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a suitable sized piece of the included heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat gun to shrink it down around the covering, therefore offering you a flush, tight fit over the previously frayed servo covering. Do the very same with completion of your servo wire, being careful to leave the terminal bare so it can easily plug into your receiver. Also, make sure to keep in mind of the servo wire polarity if you cover the full wire – this will guarantee that you will understand exactly what direction to plug your servo terminal into your receiver.

Here is a fantastic thing that numerous others have bought at the very same time.

Servo line Color Blue/Black (1m)

Seeking to clean up the look of your helicopter, aircraft of RC vehicle & secure your servo lines from chaffing? Servo Line Covering is a simple way to secure your servo wires, including a clean, visual want to your RC device, and can be set up in a matter of minutes. Select from our amazing line of diverse colors to add an entire new look to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Install Servo Line Covering?

Simply eliminate your servo(s) from the receiver, measure the length of covering you will require for your servo wire(s), and open one end of the covering and insert the servo terminal inside. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and slowly inching the covering over the terminal, and pushing the terminal forward.

Once your servo wire is covered, cut off a suitable sized piece of the included heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat gun to shrink it down around the covering, therefore offering you a flush, tight fit over the previously frayed servo covering. Do the very same with completion of your servo wire, being careful to leave the terminal bare so it can easily plug into your receiver. Also, make sure to keep in mind of the servo wire polarity if you cover the full wire – this will guarantee that you will understand exactly what direction to plug your servo terminal into your receiver.

Frequently Bought Together

Vortex Hobbies 6S JST-XH Lipo Balance Wire Extension Lead (12 IN)
+
Venom Racing Low Voltage Battery Monitor 2-8S
+
Vortex Hobbies 4S JST-XH Lipo Balance Wire Extension Lead (12 IN)
This Item: Vortex Hobbies 6S JST-XH Lipo Balance Wire Extension Lead (12 IN)
$3.39
Venom Racing Low Voltage Battery Monitor 2-8S
$10.99
Vortex Hobbies 4S JST-XH Lipo Balance Wire Extension Lead (12 IN)
$2.99

Total Price: $17.37

Add All Three To Cart
5 out of 5 stars
5 star  
  (1)
4 star  
  (0)
3 star  
  (0)
2 star  
  (0)
1 star  
  (0)

Share your thoughts with others

Write a Customer Review
  
  

 good use
By Kevin S on April 8, 2018   Verified Purchase

Did just what I wanted

Was this review helpful to you?
  
Thank you for your feedback.

Customers who bought this product also purchased

Visual Parts Finder