JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Vortex Hobbies 6S JST-XH Lipo Balance Wire Extension Lead (12 IN) (Vortex Hobbies JST-XH6S12 | VTXJST-XH6S12)

Top Seller

Model: Vortex Hobbies JST-XH6S12
Dist. #: VTXJST-XH6S12   SKU: VTXJST-XH6S12

Customer Reviews: Rated 5.0 stars 5 of 5 (1 Review)

Out of stock

Price:  $3.99

This item will earn you 4 reward point(s).
4 points = $0.08 off your next order. Learn More

Updated on Mar 28, 2024 11:07:13 PM

6S JST-XH Lipo Balance Wire Extension Lead (12 IN)...
This is a 6S JST-XH Lipo Balance Wire Extension Lead

Length: 12 Inches

The listed below item likewise pairs really well with the item being talked about.

4S JST-XH Lipo Balance Wire Extension Lead

This is a FOUR JST-XH Lipo Balance Wire Extension Lead

Length: 12 Inches

Several others have actually purchased this item together with the item that you are currently checking out.

EC5 Device Connector (2)


Functions



Capable of more than 120A continuous existing with 10-awg wireErgonomically pleasing and simple to gripProtected to avoid shorting and reverse polaritySuperior technology suited to today's advanced applicationsDesigned with convenience and reliability in mind




Overview


E-flite's top quality EC5 ports must be a staple for each workbench. EC5 (E-flite Connector 5mm) ports, leads with ports, and accessories are ideal for electric power applications and work with any battery, battery charger, ESC, Power Meter, and so on. They are ideal for high power applications.

Several others have actually purchased this item together with the item that you are currently checking out.

EC5 Extension Lead with 6" Wire, 10Awg




Regularly purchased with the item that you are currently checking out.

Servo line Color Black & Green

Seeking to tidy up the look of your helicopter, plane of RC vehicle & protect your servo lines from chaffing? Servo Line Covering is an easy way to protect your servo wires, adding a tidy, visual aim to your RC machine, and can be installed in a matter of minutes. Select from our interesting line of different colors to add a whole make over to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply eliminate your servo(s) from the receiver, determine the length of covering you will need for your servo wire(s), and open one end of the covering and place the servo terminal inside. It works best to "inch worm" your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pressing the terminal forward.

Once your servo wire is covered, cut off an appropriate sized piece of the included heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, hence giving you a flush, tight fit over the formerly frayed servo covering. Do the very same with the end of your servo wire, being careful to leave the terminal bare so it can easily connected into your receiver. Also, make sure to keep in mind of the servo wire polarity if you cover the complete wire – this will guarantee that you will understand exactly what instructions to plug your servo terminal into your receiver.

Here is a wonderful item that lots of others have actually bought at the same time.

Servo line Color Blue/Black (1m)

Seeking to tidy up the look of your helicopter, plane of RC vehicle & protect your servo lines from chaffing? Servo Line Covering is an easy way to protect your servo wires, adding a tidy, visual aim to your RC machine, and can be installed in a matter of minutes. Select from our interesting line of different colors to add a whole make over to your RC machine!

Included In Bundle:

(1) 1M (3.28 ft.) Servo Line Covering

(1) 9 in. Heat Shrink Wrap

How Do I Set up Servo Line Covering?

Simply eliminate your servo(s) from the receiver, determine the length of covering you will need for your servo wire(s), and open one end of the covering and place the servo terminal inside. It works best to “inch worm” your servo wire by holding the terminal inside the servo covering, and gradually inching the covering over the terminal, and pressing the terminal forward.

Once your servo wire is covered, cut off an appropriate sized piece of the included heat shrink, and slide it over the covering till it is flush with the servo itself. Heat the shrink wrap with a soldering iron or heat weapon to shrink it down around the covering, hence giving you a flush, tight fit over the formerly frayed servo covering. Do the very same with the end of your servo wire, being careful to leave the terminal bare so it can easily connected into your receiver. Also, make sure to keep in mind of the servo wire polarity if you cover the complete wire – this will guarantee that you will understand exactly what instructions to plug your servo terminal into your receiver.

Frequently Bought Together

Vortex Hobbies 6S JST-XH Lipo Balance Wire Extension Lead (12 IN)
+
Vortex Hobbies 4S JST-XH Lipo Balance Wire Extension Lead
+
Dynamite 6S Balance Plug Savers JST_XH (5pc)
This Item: Vortex Hobbies 6S JST-XH Lipo Balance Wire Extension Lead (12 IN)
$3.99
Vortex Hobbies 4S JST-XH Lipo Balance Wire Extension Lead
$3.99
Dynamite 6S Balance Plug Savers JST_XH (5pc)
$7.39

Total Price: $15.37

Add All Three To Cart
Rated 5.0 stars
5 out of 5 stars
5 star  
  (1)
4 star  
  (0)
3 star  
  (0)
2 star  
  (0)
1 star  
  (0)

Share your thoughts with others

Write a Customer Review
  
  

Rated 5 stars good use
By Kevin S on April 8, 2018   Verified Purchase

Did just what I wanted

Was this review helpful to you?
  
Thank you for your feedback.

Customers who bought this product also purchased

Visual Parts Finder
";