JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Model: Venom Racing 1546
Dist. #: VNRC1546   SKU: VNR1546

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

West Jordan, UT
Available Now!

List Price:  $34.99
Price:  $28.99 + $2.99 shipping
You Save:  $6 (17%)
Updated on Apr 20, 2018 06:40:49 AM

NiMH 7.2V 4200mAh Stick Pack Univ Plug...
This is a Pre-Assembled 6 cell, 4200mAh Nickel Metal Hydride Battery Pack.
NiMH Batteries Have A Different Chemistry Than NiCd Batteries So They
Require Various Charging Methods (See REMARKS).

Pre-assembled NiMH Sub-C size cells for use
    with 1/10 scale R/C vehicles
Also fantastic for electrical plane
Provides 50%+ longer run times verses 2000mAh packs
Great for endurance racing
Higher typical voltage indicates more power verses NiCd packs
Ni-MH cells have no discharge memory so there is no need to deep
    discharge them by shorting out the cells. This harms the cells.
No need to be recycled, NiMH cells are eco-friendly
Venom Universal Four Plug System enables connection between today's
    4 most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    merely attach desired plug to Venom Plug on battery's wire leads

One Assembled 6 cell, 4200mAh NiMH Battery Load with Traxxas, Tamiya,
Deans and EC3 Plugs

Battery charger: Having Negative DeltaV or Absolutely no DeltaV Peaking capabilities
Discharger: Having capabilities to appropriately discharge batteries

Charge Rate: 1A for extended life, 2A for enhanced efficiency
    10-20 millivolts (.01 to .02V)
Height: 0.96" (24.5mm)
Width: 1.8" (47.1mm)
Length: 5.4" (136.3mm)
Weight: 11.2oz (317g)
Maximum Cycles Daily: 3, with a 1 to 2 hour pause
    between cycles
Dead Shorting: Not Suggested

Do Not dead short the cells after discharging or store them with a
    resistor across the pack. They do not require this and it harms
    the battery pack. Store cells with voltage in them.
Use a digital voltmeter if your battery charger does not have one, to keep track of
    the voltage. As quickly as the voltage stops rising, the pack is
    charged. Do not let voltage drop like you would with NiCd cells.
Charger MUST be able to change the unfavorable peak charge rate.
Heat or overcharging will degrade or harm NiMH cells.

Lots of others have actually bought this item in addition to the item that you are currently reading about.

This is the 1/10 scale, radio controlled, electrical powered, ready to run
SCX10 Rock Crawler Truck with the Path Honcho Body from Axial Racing.

Chassis: Rigid steel C-channel, tapered for increased articulation
    and added realism
Drive: Four wheel shaft drive with sintered diff locker, slipper
    clutch and WB8 Swine driveshafts
Radio: AX-3 2.4GHz handgun grip with digital high-torque metal gear
    guiding servo
ESC: AE-2 Forward/Reverse ESC with drag brake
Motor: 27T 540 size
Shocks: Oil filled, with double rate springs and realistic looking
    non-functional tank
LED Lights: 2 white for front and 2 red for rear
Tires: 1.9" (48mm) Ripsaw
Wheels: Walker Evans Racing wheels, black and chrome in color with
    12mm hex
Rear Suspension: Four link design enhanced to reduce axle steer and
    torque twist
Bumper: Front, tube style plastic with aluminum skid plate
Body: Path Honcho Body
    with plastic molded roll cage and lexan formed flat bed with
    diamond pattern and fuel cell details
Ball Bearings: Complete set confined
Spur Gear: Plastic 48 pitch, 87 tooth
Pinion Gear: Steel 48 pitch, 14 tooth

SCX10 Rock Crawler Truck from Axial Racing with tires, wheels, radio
    motor, ESC, 2 head and 2 LED tail lights with controller,
    foam inserts, grease, decals, instruction manual

AA Batteries: Four for transmitter
Battery: 7.2V NiMH 6-cell stick pack or 7.4V 2S LiPo pack
Battery Battery charger: To match picked battery
Structure and Track Devices

Length: 18" (457mm)
Width: 9" (227mm)
Height: 8" (200mm)
Wheelbase: 12.3" (313mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.0pounds (1814g)
Length: 18" (457mm)
Width: 8.5" (216mm)
Height: 5.4" (137mm)

For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 5x11mm Dogbones 1 DTXC1547
2 10x15mm Dogbones 1 DTXC1595
2 5x11mm Front Axle Assembly 1 DTXC1547
2 5x11mm Rear Axle Assembly 1 DTXC1547
2 10x15mm Center Providers 1 DTXC1595
2 5x11mm Center Providers 1 DTXC1547
2 10x15mm Axle 1 DTXC1595
2 5x11mm Axle 1 DTXC1547
4 5x10mm Transmission 2 DTXC1535
2 8x16mm Transmission 1 DTXC1585

Customers who bought this product also purchased

Associated Hood Pins Small (6)


Associated Hood Pins (6)


Visual Parts Finder
What's New?
Align 700X Painted Canopy