JavaScript seems to be disabled in your browser.

You must have JavaScript enabled in your browser to utilize the functionality of this website. Click here for instructions on enabling javascript in your browser.

Model: Venom Racing 1546
Dist. #: VNRC1546   SKU: VNR1546

Be the first to review this product. (Write Review)

Shipping: In Stock For Shipping
Store Pickup:

West Jordan, UT
Ship To Store - Pick up in 1 day.

List Price:  $34.99
Price:  $27.99 + $2.99 shipping
You Save:  $7 (20%)
Updated on Sep 23, 2017 07:59:12 PM

NiMH 7.2V 4200mAh Stick Pack Univ Plug...
This is a Pre-Assembled 6 cell, 4200mAh Nickel Metal Hydride Battery Pack.
NiMH Batteries Have A Different Chemistry Than NiCd Batteries So They
Need Different Charging Techniques (See COMMENTS).

Pre-assembled NiMH Sub-C size cells for use
    with 1/10 scale R/C vehicles
Likewise great for electrical aircraft
Provides 50%+ longer run times verses 2000mAh packs
Great for endurance racing
Higher typical voltage means more power verses NiCd packs
Ni-MH cells have no discharge memory so there is no need to deep
    release them by shorting out the cells. This harms the cells.
No need to be recycled, NiMH cells are environmentally friendly
Venom Universal 4 Plug System allows connection between today's
    4 most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    merely attach wanted plug to Venom Plug on battery's wire leads

One Put together 6 cell, 4200mAh NiMH Battery Pack with Traxxas, Tamiya,
Deans and EC3 Plugs

Battery charger: Having Negative DeltaV or Absolutely no DeltaV Coming to a head capabilities
Discharger: Having capabilities to effectively release batteries

Charge Rate: 1A for prolonged life, 2A for enhanced performance
    10-20 millivolts (.01 to .02V)
Height: 0.96" (24.5mm)
Width: 1.8" (47.1mm)
Length: 5.4" (136.3mm)
Weight: 11.2oz (317g)
Maximum Cycles Daily: Three, with a 1 to 2 hour pause
    between cycles
Dead Shorting: Not Recommended

Do Not dead short the cells after discharging or store them with a
    resistor across the pack. They do not require this and it harms
    the battery pack. Store cells with voltage in them.
Use a digital voltmeter if your charger does not have one, to monitor
    the voltage. As soon as the voltage stops increasing, the pack is
    charged. Do not let voltage drop like you would with NiCd cells.
Charger MUST be able to change the negative peak charge rate.
Heat or overcharging will deteriorate or harm NiMH cells.

Many others have actually bought this thing along with the thing that you are presently checking out.

This is the 1/10 scale, radio controlled, electrical powered, ready to run
SCX10 Rock Crawler Truck with the Path Honcho Body from Axial Racing.

Chassis: Rigid steel C-channel, tapered for increased articulation
    and added realism
Drive: 4 wheel shaft drive with sintered diff locker, slipper
    clutch and WB8 Swine driveshafts
Radio: AX-3 2.4GHz handgun grip with digital high-torque metal gear
    guiding servo
ESC: AE-2 Forward/Reverse ESC with drag brake
Motor: 27T 540 size
Shocks: Oil filled, with double rate springs and realistic looking
    non-functional reservoir
LED Lights: Two white for front and 2 red for rear
Tires: 1.9" (48mm) Ripsaw
Wheels: Walker Evans Racing wheels, black and chrome in color with
    12mm hex
Rear Suspension: 4 link design enhanced to decrease axle guide and
    torque twist
Bumper: Front, tube design plastic with aluminum skid plate
Body: Path Honcho Body
    with plastic molded roll cage and lexan formed flat bed with
    diamond pattern and fuel cell information
Ball Bearings: Complete set enclosed
Stimulate Gear: Plastic 48 pitch, 87 tooth
Pinion Gear: Steel 48 pitch, 14 tooth

SCX10 Rock Crawler Truck from Axial Racing with tires, wheels, radio
    motor, ESC, 2 head and 2 LED tail lights with controller,
    foam inserts, grease, decals, user's manual

AA Batteries: 4 for transmitter
Battery: 7.2V NiMH 6-cell stick pack or 7.4V TWO LiPo pack
Battery Battery charger: To match selected battery
Structure and Track Equipment

Length: 18" (457mm)
Width: 9" (227mm)
Height: 8" (200mm)
Wheelbase: 12.3" (313mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.0pounds (1814g)
Length: 18" (457mm)
Width: 8.5" (216mm)
Height: 5.4" (137mm)

For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 5x11mm Dogbones 1 DTXC1547
2 10x15mm Dogbones 1 DTXC1595
2 5x11mm Front Axle Assembly 1 DTXC1547
2 5x11mm Rear Axle Assembly 1 DTXC1547
2 10x15mm Hub Providers 1 DTXC1595
2 5x11mm Hub Providers 1 DTXC1547
2 10x15mm Axle 1 DTXC1595
2 5x11mm Axle 1 DTXC1547
4 5x10mm Transmission 2 DTXC1535
2 8x16mm Transmission 1 DTXC1585

Customers who bought this product also purchased

Associated Hood Pins Small (6)
$0.99 $1.00


Associated Hood Pins (6)


Visual Parts Finder
What's New?
$259.95 $450.00