Venom Racing NiMH 7.2V 4200mAh Stick Pack Univ Plug

This is a Pre-Assembled 6 cell, 4200mAh Nickel Metal Hydride Battery Pack.
NiMH Batteries Have A Different Chemistry Than NiCd Batteries So They
Need Different Charging Approaches (See REMARKS).

FEATURES:
Pre-assembled NiMH Sub-C size cells for use
    with 1/10 scale R/C automobiles
Likewise great for electrical aircraft
Offers 50%+ longer run times verses 2000mAh packs
Great for endurance racing
Greater average voltage suggests more power verses NiCd packs
Ni-MH cells have no discharge memory so there is no have to deep
    release them by shorting out the cells. This harms the cells.
No have to be recycled, NiMH cells are environmentally friendly
Venom Universal 4 Plug System allows connectivity in between today's
    four most common battery plugs, Tamiya, Traxxas, Deans and EC3,
    simply attach wanted plug to Venom Plug on battery's wire leads

INCLUDES:
One Assembled 6 cell, 4200mAh NiMH Battery Pack with Traxxas, Tamiya,
Deans and EC3 Plugs

NEEDS:
Charger: Having Unfavorable DeltaV or No DeltaV Peaking abilities
Discharger: Having abilities to effectively release batteries

SPECS:
Charge Rate: 1A for prolonged life, 2A for enhanced performance
    10-20 millivolts (.01 to .02V)
Height: 0.96" (24.5mm)
Width: 1.8" (47.1mm)
Length: 5.4" (136.3mm)
Weight: 11.2oz (317g)
Optimum Cycles Per Day: 3, with a 1 to 2 hour pause
    in between cycles
Dead Shorting: Not Suggested

REMARKS:
Do Not dead brief the cells after discharging or store them with a
    resistor across the pack. They do not require this and it harms
    the battery pack. Shop cells with voltage in them.
Use a digital voltmeter if your charger does not have one, to monitor
    the voltage. As quickly as the voltage stops rising, the pack is
    charged. Do not let voltage drop like you would with NiCd cells.
Charger MUST be able to change the negative peak charge rate.
Heat or overcharging will degrade or damage NiMH cells.

Several others have acquired this item along with the item that you are currently reading about.



This is the 1/10 scale, radio managed, electrical powered, prepared to run
SCX10 Rock Spider Truck with the Path Honcho Body from Axial Racing.

FEATURES:
Chassis: Stiff steel C-channel, tapered for increased articulation
    and included realism
Drive: 4 wheel shaft drive with sintered diff locker, slipper
    clutch and WB8 Wild Boar driveshafts
Radio: AX-3 2.4GHz handgun grip with digital high-torque metal gear
    guiding servo
ESC: AE-2 Forward/Reverse ESC with drag brake
Motor: 27T 540 size
Shocks: Oil filled, with dual rate springs and practical looking
    non-functional reservoir
LED Lights: 2 white for front and 2 red for rear
Tires: 1.9" (48mm) Ripsaw
Wheels: Walker Evans Racing wheels, black and chrome in color with
    12mm hex
Rear Suspension: 4 link design optimized to reduce axle guide and
    torque twist
Bumper: Front, tube style plastic with aluminum skid plate
Body: Path Honcho Body
    with plastic molded roll cage and lexan formed flat bed with
    diamond pattern and fuel cell details
Ball Bearings: Full set confined
Stimulate Gear: Plastic 48 pitch, 87 tooth
Pinion Gear: Steel 48 pitch, 14 tooth

INCLUDES:
SCX10 Rock Spider Truck from Axial Racing with tires, wheels, radio
    motor, ESC, 2 head and 2 LED tail lights with controller,
    foam inserts, grease, decals, instruction manual

NEEDS:
AA Batteries: 4 for transmitter
Battery: 7.2V NiMH 6-cell stick pack or 7.4V TWO LiPo pack
Battery Charger: To match picked battery
Building and Track Equipment

SPECS:
Vehicle:
Length: 18" (457mm)
Width: 9" (227mm)
Height: 8" (200mm)
Wheelbase: 12.3" (313mm)
Ground Clearance: 2.7" (68mm)
Weight: 4.0pounds (1814g)
    Body:
Length: 18" (457mm)
Width: 8.5" (216mm)
Height: 5.4" (137mm)

REMARKS:
For Replacement Ball Bearings use:
    Qty. Size Place Qty. Bearing Set
2 5x11mm Dogbones 1 DTXC1547
2 10x15mm Dogbones 1 DTXC1595
2 5x11mm Front Axle Assembly 1 DTXC1547
2 5x11mm Back Axle Assembly 1 DTXC1547
2 10x15mm Center Carriers 1 DTXC1595
2 5x11mm Center Carriers 1 DTXC1547
2 10x15mm Axle 1 DTXC1595
2 5x11mm Axle 1 DTXC1547
4 5x10mm Transmission 2 DTXC1535
2 8x16mm Transmission 1 DTXC1585