Vanquish Products VS4-10 Pro Black Anodized - Origin Halfcab

VS4-10 Pro
The VS4-10 Pro represents the top tier of RC scale automobile packages, supplying the highest quality materials, remarkable design, and the most durable platform readily available in its market. The VS4-10 Pro provides a list of features that have actually never ever been matched, supplying a structure and driving experience out of the box that make sure to impress.

VFD Transmission
The VFD Transmission from Vanquish Products is developed to provide an optimal balance of efficiency, scale look, strength and flexible optional devices. The VFD's design positions the motor forward and as low as possible to keep the weight where you desire it. The VFD's mix of balanced out front T-case output and offset pumpkin of the Currie front axle make this possible. The T-case uses special aluminum bearing plates for high strength bearing positioning and the removal of flex found in traditional plastic real estates. The modular design of the bearing plates permit optional gear ratios used to be used inside the T-case.

Aluminum Bearing Plates

Wide Profile Steel Machined Equipments

Overdrive Gear Set (6.5% OD)

Solidified Chromoly Shafts

Industry standard 32P spur gears

Low Motor Position (540 Size)

Full ball bearing transmission

Extended Skid Plate for Motor Security

Offset front output for balanced out front axle setup

Scale Molded Transmission Real Estate

6mm Aluminum motor plate

Molded Spur Equipment Cover

Optional Overdrive gear sets readily available

Topshaft with slipper eliminator

32P 56T Stimulate and 15T Pinion

VS4-10 Chassis
Vanquish Products VS4-10 Chassis is made to provide you with a balance scale looks and unrestricted efficiency. The steel C-channel design offers scale information, molded front and rear cross members fill the chassis rails in the highest stress places for supreme strength and provide features like double servo mounts, winch line routing, and a fuel cell. The molded rock sliders include a changeable outer part that perfectly fits the Origin Halfcab body. The VS4-10 chassis is developed to deal with the included Vanquish Products VFD transmission. The panhard install on the chassis is made from machined aluminum to hold up against the impacts of severe trail conditions. Molded shock towers catch the top of the 90mm Cut Scale Shocks in double shear for maximum support. The aluminum battery and electronics trays provide numerous places for battery and electronics placement. Full width formed front and rear bumpers increase approach and departure angles and permit versatility throughout effect on the trail.

C-Channel Chassis Rails

Chassis Installed Servo

Aluminum Panhard Mount

Double Shear Shock Installing

Well Balanced Battery and Electronic Devices Tray Arrangement

Molded Front and Rear Bumpers

Molded Rock Sliders

Molded Lexan Inner Fenders

Servo Winch Mounting Location

Bodyside Retaining Guides

Optional Rear Upper Link Mounting Locations

Optional Front Upper Link Mounting Locations

Requirement Chassis Bumper Installing Geometry (Fits popular post design bumpers)

VS4-10 Pro Drivetrain
The VS4-10 Pro drivetrain uses the new VFD transmission and our tested axles you currently understand and trust. The licensed Currie Enterprises F9 design front axle features a balanced out front differential real estate and uses chromoly VDI universal axle shafts, high-pinion hypoid ring gear, chromoly 6 bolt spool and patent pending one-piece bearing retainers to create an extremely scale and durable front axle assembly. Integrated inner c-hubs create an unmatched scale look and are reinforced to provide the most durable axle real estate possible, with quickly exchangeable chromoly threaded inserts for the knuckle king pin screws. The rear Currie F9 design axle features a centered differential real estate and equal length chromoly axle shafts, with the same gears and spool found in the front axle.

VFD Transmission

Currie Business Axle Real Estates

Offset Front Pumpkin

Focused Rear Pumpkin

High-Pinion Hypoid Axle Equipments

6-Bolt Ring Gear and Spindle

Chromoly VDI front axles

Integrated Inner C's

Chromoly Threaded Inserts

One-Piece Bearing Retainers (patent pending)

Aluminum Knuckles with Scale High Steer Arm

Chromoly Back Axle Shafts

Scale F9 3rd Members

Double Shear Shock Installs

Aluminum 12mm Hexes

Cut Steel Driveshafts

Full Ball Bearing

Origin Halfcab Body
The Origin Halfcab polycarbonate body provides retro styling with a modern-day style. The complete polycarbonate interior was developed by Knight Customs with front pail seats, a detailed dash and big cargo area in the back. The dash attaches to the interior and molded plastic details like steering wheel and gear shifter assistance bring the interior to life. The detailed front grill assembly is injection molded and features 10mm LED all set headlight pails, with a scale radiator assembly, fans, and fan shrouds. In addition, the front light pails can be replaced with optional Vanquish Rigid Industries Q-Series light pods for even more light! The rear light pails fit 5mm LEDs, so everyone will take notice when you are coming or going. Other scale details like windscreen wipers, door deals with and fuel filler cap are included to step up the look even further. The whole body, interior and installing holes are all laser cut – so all you need to stress over is paint.

Retro Halfcab Styling

Molded Front Grill

Full Interior

Separate Dash

Molded Steering Wheel and Equipment Shifter

10mm LED Ready Headlight Buckets

5mm LED Ready Taillight Buckets

Molded Scale Radiator

Molded Fans and Shrouds

CNC Laser Cut

Extra Scale Particulars (Wipers, Door Deals With, Fuel Filler)

Window Trim, Interior and Logo Decals

Paint Masks

VS4-10 Suspension
The VS4-10 features Cut 90mm Scale shocks with aluminum threaded bodies, double X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension offers scale looks by keeping the servo out of sight, while still supplying room for big suspension travel. The suspension pivots on a complete set of stainless steel links to keep the weight down low with a smooth transition from the link to the rod ends. All suspension mounts are sized to fit to the rod end pivot ball perfectly and get rid of excess side to side play.

Cut 90mm Scale Shocks

3-link with Panhard Front Suspension

Double Triangulated 4-link Rear Suspension

Incision Stainless Steel Hyperlinks

Double Shear Shock Installing

Several optional link installing positions at the chassis for suspension tuning

KMC Wheels and VXT Tires
The VS4-10 consists of Cut KMC Machete plastic beadlock wheels and Vanquish VXT tires. The wheels hold true beadlocks and work with all Cut aluminum center alternatives. The VXT tires are 4.65" tall and are formed in a soft and sticky natural rubber substance for efficiency right out of the box. Firm foams are used to provide sidewall support that assists avoid the tire from rolling over, while keeping the tread in contact with the terrain.   

Cut KMC Machete Beadlock Wheels

Adjustable Offset Style

VXT 4.65" Tires

Soft and Sticky Natural Rubber Compound

Firm Tire Foams

Requirements

12.3" Wheelbase

9.4" (240mm) General Width

19.3" (490mm) General Length

9.8" (250mm) General Height

3.75:1 Axle Ratio

Internal Trans Ratio: Front 2.95 / Rear 3.15

General Equipment Ratio: Front 41.3 / Rear 44.0

Overdrive Portion: 6.5%

15T (3mm shaft) 32P Pinion Included

56T 32P Stimulate Equipment Included

 

Needed Products

Shock Oil

Tools

Paint

Grease (VPS01017 Suggested)

Threadlock

Battery

Charger

Radio System

540 size Motor (3mm Motor Shaft Suggested)

ESC

Steering Servo

Servo Horn (20mm Length Suggested)

 

Alternative Components Available

1.9 Beadlocks

Currie Swaybar

Rigid Lightbars

Rigid Q Series (Can be fitted as headlights)

VFD Transmission Dig

VFD Overdrive Equipment Sets

VFD Titanium Topshaft

Knight Customs Accessories on Shapeways.com

 

Notes:
VS4-10 PRO is shown with items that are not included with the package. Please see list of required items.

No electronics are supplied with the VS4-10 PRO Kit.

No Receiver box is included with the VS4-10 PRO kit.

Items and specifications undergo change.

Assembly Required. Children 14 and under should have adult guidance.