Vanquish Products VS4-10 Pro Black Anodized - Origin Halfcab

VS4-10 Pro
The VS4-10 Pro represents the top tier of RC scale vehicle packages, supplying the highest quality materials, superior style, and the most durable platform readily available in its market. The VS4-10 Pro uses a list of features that have actually never been matched, supplying a building and driving experience out of package that are sure to impress.

VFD Transmission
The VFD Transmission from Vanquish Products is created to supply an optimum balance of efficiency, scale appearance, strength and flexible optional accessories. The VFD's style puts the motor forward and as low as possible to keep the weight where you desire it. The VFD's combination of balanced out front T-case output and offset pumpkin of the Currie front axle make this possible. The T-case makes use of distinct aluminum bearing plates for high strength bearing placing and the elimination of flex discovered in traditional plastic housings. The modular style of the bearing plates permit optional equipment ratios used to be used inside the T-case.

Aluminum Bearing Plates

Wide Profile Steel Machined Gears

Overdrive Gear Set (6.5% OD)

Solidified Chromoly Shafts

Industry basic 32P spur equipments

Low Motor Position (540 Size)

Full ball bearing transmission

Extended Skid Plate for Motor Protection

Offset front output for balanced out front axle configuration

Scale Molded Transmission Housing

6mm Aluminum motor plate

Molded Spur Gear Cover

Optional Overdrive equipment sets readily available

Topshaft with slipper eliminator

32P 56T Stimulate and 15T Pinion

VS4-10 Chassis
Vanquish Products VS4-10 Chassis is made to supply you with a balance scale looks and unrestricted efficiency. The steel C-channel style provides scale detail, molded front and rear cross members fill the chassis rails in the highest stress areas for supreme strength and supply features like double servo installs, winch line routing, and a fuel cell. The molded rock sliders come with a replaceable outer portion that perfectly fits the Origin Halfcab body. The VS4-10 chassis is developed to deal with the included Vanquish Products VFD transmission. The panhard mount on the chassis is made from machined aluminum to endure the effects of extreme path conditions. Molded shock towers capture the top of the 90mm Incision Scale Shocks in double shear for optimal assistance. The aluminum battery and electronics trays supply multiple areas for battery and electronics placement. Full width molded front and rear bumpers increase technique and departure angles and permit flexibility during effect on the trail.

C-Channel Chassis Rails

Chassis Mounted Servo

Aluminum Panhard Mount

Double Shear Shock Installing

Balanced Battery and Electronics Tray Arrangement

Molded Front and Rear Bumpers

Molded Rock Sliders

Molded Lexan Inner Fenders

Servo Winch Mounting Place

Bodyside Retaining Guides

Optional Rear Upper Link Mounting Locations

Optional Front Upper Link Mounting Locations

Requirement Chassis Bumper Installing Geometry (Fits popular post style bumpers)

VS4-10 Pro Drivetrain
The VS4-10 Pro drivetrain makes use of the new VFD transmission and our tested axles you already know and trust. The licensed Currie Enterprises F9 style front axle features an offset front differential housing and uses chromoly VDI universal axle shafts, high-pinion hypoid ring equipment, chromoly 6 bolt spindle and patent pending one-piece bearing retainers to produce an incredibly scale and durable front axle assembly. Integrated inner c-hubs produce an unmatched scale look and are reinforced to supply the most durable axle housing possible, with quickly replaceable chromoly threaded inserts for the knuckle king pin screws. The rear Currie F9 style axle features a centered differential housing and equal length chromoly axle shafts, with the same equipments and spool discovered in the front axle.

VFD Transmission

Currie Enterprise Axle Real Estates

Offset Front Pumpkin

Centered Rear Pumpkin

High-Pinion Hypoid Axle Gears

6-Bolt Ring Gear and Spool

Chromoly VDI front axles

Integrated Inner C's

Chromoly Threaded Inserts

One-Piece Bearing Retainers (patent pending)

Aluminum Knuckles with Scale High Steer Arm

Chromoly Back Axle Shafts

Scale F9 3rd Members

Double Shear Shock Installs

Aluminum 12mm Hexes

Incision Steel Driveshafts

Full Ball Bearing

Origin Halfcab Body
The Origin Halfcab polycarbonate body uses retro styling with a modern flair. The full polycarbonate interior was created by Knight Customs with front pail seats, an in-depth dash and big freight location in the back. The dash attaches to the interior and molded plastic information like steering wheel and equipment shifter assistance bring the interior to life. The in-depth front grill assembly is injection molded and features 10mm LED prepared headlight containers, with a scale radiator assembly, fans, and fan shrouds. In addition, the front light containers can be replaced with optional Vanquish Stiff Industries Q-Series light pods for even more light! The rear light containers fit 5mm LEDs, so everybody will take notice when you are coming or going. Other scale information like windshield wipers, door handles and fuel filler cap are included to step up the appearance even further. The entire body, interior and installing holes are all laser cut – so all you require to fret about is paint.

Retro Halfcab Styling

Molded Front Grill

Full Interior

Separate Dash

Molded Wheel and Gear Shifter

10mm LED Ready Headlight Buckets

5mm LED Ready Taillight Buckets

Molded Scale Radiator

Molded Fans and Shrouds

CNC Laser Cut

Extra Scale Details (Wipers, Door Deals With, Fuel Filler)

Window Trim, Interior and Logo Decals

Paint Masks

VS4-10 Suspension
The VS4-10 features Incision 90mm Scale shocks with aluminum threaded bodies, double X-ring seals, locking preload collars, keyed spring cups, polished steel shock shafts, and machined pistons. The front 3-link with panhard suspension provides scale looks by keeping the servo out of sight, while still supplying space for big suspension travel. The suspension rotates on a full set of stainless steel links to keep the weight down low with a smooth transition from the link to the rod ends. All suspension installs are sized to fit to the rod end pivot ball perfectly and eliminate excess side to side play.

Incision 90mm Scale Shocks

3-link with Panhard Front Suspension

Double Triangulated 4-link Rear Suspension

Incision Stainless-steel Hyperlinks

Double Shear Shock Installing

Several optional link installing positions at the chassis for suspension tuning

KMC Wheels and VXT Tires
The VS4-10 consists of Incision KMC Machete plastic beadlock wheels and Vanquish VXT tires. The wheels are true beadlocks and are compatible with all Incision aluminum center alternatives. The VXT tires are 4.65" high and are molded in a soft and sticky natural rubber substance for efficiency right out of package. Firm foams are used to supply sidewall assistance that assists avoid the tire from rolling over, while keeping the tread in contact with the surface.   

Incision KMC Machete Beadlock Wheels

Adjustable Offset Design

VXT 4.65" Tires

Soft and Sticky Natural Rubber Compound

Firm Tire Foams

Requirements

12.3" Wheelbase

9.4" (240mm) Overall Width

19.3" (490mm) Overall Length

9.8" (250mm) Overall Height

3.75:1 Axle Ratio

Internal Trans Ratio: Front 2.95 / Rear 3.15

Overall Gear Ratio: Front 41.3 / Rear 44.0

Overdrive Percentage: 6.5%

15T (3mm shaft) 32P Pinion Consisted Of

56T 32P Stimulate Gear Consisted Of

 

Required Products

Shock Oil

Tools

Paint

Grease (VPS01017 Recommended)

Threadlock

Battery

Battery charger

Radio System

540 size Motor (3mm Motor Shaft Recommended)

ESC

Steering Servo

Servo Horn (20mm Length Recommended)

 

Option Components Available

1.9 Beadlocks

Currie Swaybar

Stiff Lightbars

Stiff Q Series (Can be fitted as headlights)

VFD Transmission Dig

VFD Overdrive Gear Sets

VFD Titanium Topshaft

Knight Customs Accessories on Shapeways.com

 

Notes:
VS4-10 PRO is revealed with products that are not included with the package. Please see list of needed items.

No electronics are provided with the VS4-10 PRO Kit.

No Receiver box is included with the VS4-10 PRO kit.

Items and specs are subject to change.

Assembly Required. Children 14 and under must have adult guidance.