Vanquish Products VRD Carbon - Kit

User's manual located here - Modification 1 (Page 20 screw lengths updated)

VRD CARBON SET
The Vanquish Products VRD Carbon Package is our extremely first competitors level platform brought to life by some of the industry's most knowledgeable designers in the RC rock crawling section.  Utilizing an all brand-new Lightweight Specification VFD Transmission and updated F10 competitors motivated portal axles the VRD Carbon Package is a highly competitive, predictable and versatile platform.  The heart of the VRD Carbon Package is a matte surface 3mm thick pair of carbon fiber frame rails mated to the 6 degree flat skid plate.  The molded chassis parts and skid plate place the lightweight spec VFD transmission as low as possible into the VRD chassis.  For the very first time the front F10 Website axle is geared up with a servo on axle and 4-link.  Front and rear axles include weighted brass tube inserts in addition to the front alloy knuckle weights to keep the center of mass as low as possible, equating to a high performance driving experience.  

Lightweight Specification VFD Transmission

3mm Matte Carbon Fiber Frame Bed rails - 6 degree flat skid plate

37% Overdrive 

F10 Website Axles

Brass weight tubes in axles

Alloy heavy portal knuckle weights

Front Axle Overdrive Website gears

Rear Axle Standard Website Gears

Lightweight Machined Chromoly VFD Transmission Gears

Machined Spindle, Ring Equipment, Pinion equipment in axles

Chromoly Universal axle shafts

Hard Anodized Shock Bodies

Stainless-steel Links with HD Bent rear links

Cut Pro M4 Rod Ends

Stamped Aluminum Rock Sliders

Adjustable multi point body installing system

Chassis

The Vanquish Products VRD Carbon chassis is geared up with all brand-new molded chassis parts that provide a tunable platform to adapt to the most requiring terrain.  Multiple shock and body installing positions integrated with minimalistic front/rear interchangeable bumpers make body installing and fitment easy.  Stamped aluminum rock sliders provide a flat place for electronic devices and/or battery installing and are able to support and safeguard your body.  

Drivetrain

The center of the VRD Carbon Package is the brand-new lightweight spec VFD transmission.  Equipped with a light-weight machined aluminum motor plate, aluminum motor plate standoffs, while leaving out the cosmetic VFD tunnel for a high performance look.  Internally the VFD is geared up with machined aluminum bearing plates and machined lightweight chromoly gears.  Each internal equipment has been re-designed to be as lightweight as possible dropping the weight of the general transmission but keeping a high level of toughness.  The T-Case has an integrated in 21% overdrive.  

The Front F10 Website axle has overdrive portal gears while the Rear F10 portal axle has the basic ratio gears, integrated with the VFD overdrive the final overdrive percentage is 37%.  Both axles include brass weighted tubes inside in addition to the alloy portal knuckle covers on the front axle.  This is the heaviest spec F10 axle yet keeping the center of mass as low as possible and the weight bias forward.  

Suspension

The VRD Carbon Package includes the Cut S8E shocks with difficult anodized shock bodies and several length tuning rod ends for a final length variety of 85-95mm.  Strong stainless-steel lower suspension links and lightweight upper links connect the chassis to the axles with the brand-new Cut Pro M4 rod ends.  The rear lower links are bent for maximum breakover clearance.  Multiple shock installing areas and tunable shock length enable a high variety of trip height and breakover change.  

Requirements

1/10th Scale

Front Axle Ratio 5.25:1

Rear Axle Ratio 6.25:1

Pinion 15T 32P

Spur 52T 32P

Total Width Hex to Hex - 200mm (7.87”)

Wheelbase - 322mm (12.67”)

Total Front Ratio 46.5:1

Total Rear Ratio 68:1

Final Overdrive 37%

Required Products to Complete:

Tools

Paint

Compensation Design Body

1.9 x 4.75” Tires (suggested)

1.9 Wheels (Vanquish Products or SLW Center Compatible wheels required)

Transmitter / Receiver

Steering servo (25 spline 20mm Servo Horn consisted of)

540 Motor

ESC

Battery (35mm x 35mm x 100mm Maximum)

Battery charger