Traxxas Wing Mount/ Hardware (1/16 E-R

This is the Wing Mount for use on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Wing Mount
2 2.9x9.75mm Button Head Screws
2 2.9x7.95mm Button Head Screws
2 2.35x11.75mm Cap Head Screws
2 2.35x17.8mm Cap Head Screws

REQUIRES:
Setup on the car

Regularly purchased with the product that you are currently reviewing.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction, black in color

INCLUDES:
One Wing
One Decal Set

REQUIRES:
Setup on the car

SPECIFICATIONS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

Numerous others have purchased this product along with the product that you are currently reviewing.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Mounts and Posts for use on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
2 Front Body Posts
2 Rear Body Posts

REQUIRES:
Setup on the car

This product is regularly purchased with the above mentioned product.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for use on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel building and construction

INCLUDES:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Setup on the car

Regularly purchased with the product that you are currently reviewing.

Suspension Arm Set, Front (Inc

This is the Front Suspension Arm Set for use on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon building and construction
Black in color

INCLUDES:
One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

REQUIRES:
Setup on the car

This is a fantastic enhancement to the product currently being gone over.



This is a conventional replacement Antenna Tube with Cap from Dubro.
This item can be used anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Red plastic building and construction

INCLUDES:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Absolutely nothing. This is a direct fit part for any boat, vehicle, etc. that utilizes
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)

The below product likewise sets truly well with the product being gone over.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for use with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Suitable with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

INCLUDES:
TQ 2.4GHz 3-Channel Micro Receiver

SPECIFICATIONS:
Measurements: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)