Traxxas Wing Mount/ Hardware (1/16 E-R

This is the Wing Mount for usage on the Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Wing Mount
Two 2.9x9.75mm Button Head Screws
Two 2.9x7.95mm Button Head Screws
Two 2.35x11.75mm Cap Head Screws
Two 2.35x17.8mm Cap Head Screws

REQUIRES:
Setup on the vehicle

Frequently bought with the thing that you are currently checking out.

Wing, 1/16 E-Revo (Black)/ Dec

This is the Wing for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction, black in color

INCLUDES:
One Wing
One Decal Set

REQUIRES:
Setup on the vehicle

SPECS:
Length: 118mm (4.6")
Width: 43mm (1.7")
Height: 29mm (1.1")

Many others have bought this thing along with the thing that you are currently checking out.

Body Mounts, Front & Rear/ Bod

These are the Front and Rear Body Installs and Publishes for usage on the
Traxxas 1/16 E-Revo and Slash Vehicles.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Front Body Mount
One Rear Body Mount
Two Front Body Posts
Two Rear Body Posts

REQUIRES:
Setup on the vehicle

This thing is regularly bought with the above pointed out thing.

Ring Gear, Differntial/ Pinion

This is the Differential Ring and Pinion Gear for usage on the
Traxxas 1/16 E-Revo and Slash VXL Vehicles.

FEATURES:
Steel construction

INCLUDES:
One Diff Ring Gear
One Pinion Gear

REQUIRES:
Setup on the vehicle

Frequently bought with the thing that you are currently checking out.

Suspension Arm Set, Front (Inc

This is the Front Suspension Arm Set for usage on the
Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Upper Right Suspension Arm
One Lower Right Suspension Arm
One Upper Left Suspension Arm
One Upper Right Suspension Arm

REQUIRES:
Setup on the vehicle

This is a fantastic enhancement to the thing currently being talked about.



This is a standard replacement Antenna Tube with Cap from Dubro.
This item can be utilized anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Red plastic construction

INCLUDES:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Nothing. This is a direct fit part for any boat, vehicle, and so on that uses
    a standard size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)

The listed below thing likewise pairs actually well with the thing being talked about.

Tq Receiver, Micro, 2.4Ghz 3 Channel

This is the TQ 2.4GHz 3-Channel Micro Receiver
for usage with the Traxxas TQ 2.4GHz Transmitter.

FEATURES:
Suitable with the Traxxas 3-channel #6517 transmitter and the
    older 2-ch #2238 TQ 2.4GHz transmitter

INCLUDES:
TQ 2.4GHz 3-Channel Micro Receiver

SPECS:
Measurements: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)
Weight: 0.35oz (10g)