Traxxas Wheelie Bar Mnt Stamp/Rust/Bandit

    This is an optional Wheelie Bar Mount for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to hold wheelie bar arm and wheels in
    place

INCLUDES:
Put together optional Wheelie Bar Mount with mounting directions and
    hardware

NEEDS:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Get this product to improve the one you read around.

Bumper, Rear/ Slash

This is the Back Bumper and Mount for the
Traxxas Slash 1/10 2WD Short Course Racing Truck.

FEATURES:
Nylon construction
Black in color

INCLUDES:
One Back Bumper and bumper mount

NEEDS:
Setup on the Traxxas Slash

This is a wonderful enhancement to the product presently being reviewed.

Tie Bar Fiberglass

This is a Firberglass Tie Bar by Traxxas for the SRT

FUNCTIONS:
Fiberglass Construction

INCLUDES:
One Tie Bar

NEEDS:
Suspension Pins (TRAC4940)

SPECS:
Length: 98.4 mm (3.875")
Width: 7.9 mm (0.3125")
Thickness: 2.0 mm (0.082")

COMMENTS:
None

This product praises the main item right here.

3 X 15Mm Button Hex Screw (6)

This is a plan of 6 3x15mm Traxxas Button Head Screws.

FEATURES:
Steel construction, Black in color
Used on the Traxxas Revo beast truck, can also be used in any
    application where a 3x15mm button head screw is needed

INCLUDES:
Six 3x15mm Traxxas Button Head Screws

NEEDS:
2mm hex head wrench, GPMR8011

SPECS:
Length: 15mm
Diameter: 3mm

Often gotten with the product that you are presently reviewing.

Shoulder Screws Ultra Shocks

These are the Shoulder Screws for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Black steel construction

INCLUDES:
Six steel shoulder screws

SPECS:
Length: 12mm
Diameter: 3mm

Often gotten with the product that you are presently reviewing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This product praises the above reviewed product.

Susp Screw Pin Set #2640 (Hex Drive)

These are the Suspension Screws Pins for the
Traxxas Rustler, Stampede and Bandit.
The hinge pins hold the suspension arms to the bulkheads

FUNCTIONS:
Resilient steel construction

INCLUDES:
Two 48mm pins
Two 34mm pins
Two 30mm pins
Two 28mm pins
Two 25mm pins

NEEDS:
Setup on the Rustler, Stampede or Outlaw

COMMENTS:
For a total suspension pin set order TRAC4940

This product is regularly gotten with the above stated product.

Wheelie Bar Mount (1) Hardware (Blue)

This is an optional Wheelie Bar Mount in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to hold wheelie bar arm and wheels in
    place

INCLUDES:
Put together optional Wheelie Bar Mount with mounting directions and
    hardware

NEEDS:
Wheelie Bar Arm (TRAC9574)
Wheels and Axles (TRAC9576)

Right here is one more product that praises the product being reviewed.

Steering Bellcranks/Servo Saver, Spring, Horn, Retainer

This is the Steering Bellcrank Set for the Traxxas Slash 4X4.

FUNCTIONS:
Composite nylon construction
Changes a worn or damaged bellcrank set
May also be installed on the Traxxas Rustler, Outlaw and 2WD Slash
    designs (put together in different configurations depending upon design)

INCLUDES:
One Left Bellcrank Lower
One Left Bellcrank Upper
One Right Bellcrank
One Draglink
One Spring
One Spring Retainer
Two Servo Arms
Two Shoulder Screws
Two 3x15 Counter Sunk Machine Screws
Two Hollow Balls
4 Bushings
Instruction Sheet

NEEDS:
Assembly and setup following the design handbook and consisted of
instruction sheet