Traxxas Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, neon green in color
Installs at rear of chassis to prevent vehicle from turning over
    during wheelies

SUCHES AS:
Put together optional Wheelie Bar with mounting guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

This thing praises the main item right here.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building and construction, green in color

SUCHES AS:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Density: 0.12" (3.2mm)

This thing praises the main item right here.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to prevent vehicle from turning over
    during wheelies

SUCHES AS:
Put together optional Wheelie Bar with mounting guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

Numerous others have actually bought this thing along with the thing that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows capability via Castle Link USB adapter (not included,
    order CSEM6300)
Waterproof for use in nearly every environment (not meant for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Removable end bell

SUCHES AS:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Switch, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery port of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

Want another wonderful thing to match the above mentioned thing?

Antenna Tube W/ Cap, Black

This is a standard replacement Antenna Tube with Cap from Dubro
This item can be utilized anywhere an antenna tube is had to support
a receiver antenna wire.

FEATURES:
Black plastic building and construction

SUCHES AS:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Nothing. This is a direct fit part for any boat, vehicle, etc. that uses
    a standard size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)