Traxxas Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, neon green in color
Installs at rear of chassis to avoid car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with mounting guidelines and
    hardware

NEEDS:
Attaching to rear of chassis

This item praises the main item right here.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Versatile plastic building, green in color

INCLUDES:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

This item praises the main item right here.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at rear of chassis to avoid car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with mounting guidelines and
    hardware

NEEDS:
Attaching to rear of chassis

Numerous others have gotten this item in addition to the item that you are presently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for usage in heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows capability by means of Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for usage in almost every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes lots of stock brushed motors
4 magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

Want an additional wonderful item to compliment the above stated item?

Antenna Tube W/ Cap, Black

This is a standard replacement Antenna Tube with Cap from Dubro
This item can be used anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Black plastic building

INCLUDES:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Absolutely nothing. This is a direct fit part for any boat, vehicle, etc. that utilizes
    a standard size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Size: 1/8" (3.2mm)