Traxxas Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, neon green in color
Installs at rear of chassis to avoid car from flipping over
    during wheelies

SUCHES AS:
Put together optional Wheelie Bar with installing guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

This thing praises the main item here.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic construction, green in color

SUCHES AS:
RPM Wide Front Bumper in Green

SPECS:
Length: 2.7" (70mm) determined at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

This thing praises the main item here.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, blue in color
Installs at rear of chassis to avoid car from flipping over
    during wheelies

SUCHES AS:
Put together optional Wheelie Bar with installing guidelines and
    hardware

REQUIRES:
Attaching to rear of chassis

Lots of others have acquired this thing along with the thing that you are currently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for usage in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programs capability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for usage in nearly every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes lots of stock brushed motors
4 magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

SUCHES AS:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Change, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)

Want one more great thing to enhance the above discussed thing?

Antenna Tube W/ Cap, Black

This is a basic replacement Antenna Tube with Cap from Dubro
This item can be used anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Black plastic construction

SUCHES AS:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

REQUIRES:
Absolutely nothing. This is a direct fit part for any boat, car, etc. that utilizes
    a basic size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)