Traxxas Wheelie Bar Assembled-Green Stampede/Rustler/Bandit

This is an optional Wheelie Bar in Green for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, neon green in color
Installs at back of chassis to prevent automobile from flipping over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with mounting instructions and
    hardware

NEEDS:
Fastening to back of chassis

This product praises the main item right here.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is the RPM Wide Front Bumper in Green
for the 2WD Traxxas Rustler, Stampede, Nitro Sport, and Bandit.

FEATURES:
Flexible plastic construction, green in color

CONSISTS OF:
RPM Wide Front Bumper in Green

SPECIFICATIONS:
Length: 2.7" (70mm) measured at center
Width: 6.2" (157mm)
Thickness: 0.12" (3.2mm)

This product praises the main item right here.

Wheelie Bar, Assembled (Blue) (Fits Slash, Stampede, Rustler, Ba

This is an optional Wheelie Bar in Blue for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, blue in color
Installs at back of chassis to prevent automobile from flipping over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with mounting instructions and
    hardware

NEEDS:
Fastening to back of chassis

Many others have actually bought this product along with the product that you are currently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming ability through Castle Link USB adapter (not suched as,
    order CSEM6300)
Waterproof for usage in nearly every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes many stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Easily removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Switch, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)

Want an additional great product to compliment the above discussed product?

Antenna Tube W/ Cap, Black

This is a conventional replacement Antenna Tube with Cap from Dubro
This product can be used anywhere an antenna tube is needed to support
a receiver antenna wire.

FEATURES:
Black plastic construction

CONSISTS OF:
One antenna tube
One antenna tube cap
One receiver antenna wire sleeve

NEEDS:
Absolutely nothing. This is a direct fit part for any boat, car, and so on that uses
    a conventional size antenna tube.

SPECS:
Length: 12 1/4" (311mm)
Diameter: 1/8" (3.2mm)