Traxxas Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to prevent automobile from turning over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with installing guidelines and
    hardware

NEEDS:
Attaching to back of chassis

You will certainly enjoy this item if you have the item just above discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Safeguards the Chassis.

FEATURES:
Resilient Plastic Construction
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This product praises the above discussed product.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Advised for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB shows ability through Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for use in almost every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" size slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

This product praises the above discussed product.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural sleek color

INCLUDES:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

This is a amazing enhancement to the product currently being discussed.

Mntd Wheelie Bar Tires/Whls Red (2)

These are the Rubber Tires and Wheels for the
Wheelie Bar (TRAC9575) for all Traxxas Maxx series vehicles.

FEATURES:
Tires constructed of rubber, black in color with with "TRAXXAS"
    composed in white on the sidewalls
Aluminum wheels, anodized red in color

INCLUDES:
2 Rubber Tires (TRAC5185) four 5x8mm Ball Bearings, four Axles and
    2 Wheels

NEEDS:
Connecting to wheelie bar