Traxxas Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to avoid car from flipping over
    during wheelies

INCLUDES:
Put together optional Wheelie Bar with installing instructions and
    hardware

REQUIRES:
Attaching to back of chassis

You will certainly enjoy this product if you have the product earlier stated.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Secures the Chassis.

FEATURES:
Durable Plastic Building
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

REQUIRES:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This product praises the above reviewed product.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for usage in much heavier
    vehicles such as E-Revos or E-Maxx class vehicles)
USB programs ability by means of Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for usage in almost every environment (not intended for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes numerous stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" size slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery port of modeler's choice

SPECS:
ESC;
Input Voltage: TWO LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Size: 1.4" (36mm)
Shaft Size: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

This product praises the above reviewed product.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural refined color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

This is a great enhancement to the product presently being reviewed.

Mntd Wheelie Bar Tires/Whls Red (2)

These are the Rubber Tires and Wheels for the
Wheelie Bar (TRAC9575) for all Traxxas Maxx series vehicles.

FEATURES:
Tires built of rubber, black in color with with "TRAXXAS"
    written in white on the sidewalls
Aluminum wheels, anodized red in color

INCLUDES:
2 Rubber Tires (TRAC5185) four 5x8mm Ball Bearings, four Axles and
    2 Wheels

REQUIRES:
Connecting to wheelie bar