Traxxas Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to avoid automobile from turning over
    during wheelies

CONSISTS OF:
Assembled optional Wheelie Bar with installing directions and
    hardware

NEEDS:
Attaching to back of chassis

You will love this item if you have the item previously discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Secures the Chassis.

FEATURES:
Durable Plastic Building and construction
Black in Color

CONSISTS OF:
One Bumper
One Group RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

COMMENTS:
The Factory Number is #81162

This thing compliments the above talked about thing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for usage in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows ability through Castle Link USB adapter (not consisted of,
    order CSEM6300)
Waterproof for usage in almost every environment (not meant for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes lots of stock brushed motors
4 magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Easily removable end bell

CONSISTS OF:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Port,
    On/Off Change, Directions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Port: 4mm gold
Wire Length: 9.5" (241mm)

This thing compliments the above talked about thing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building
Natural refined color

CONSISTS OF:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

This is a wonderful addition to the thing currently being talked about.

Mntd Wheelie Bar Tires/Whls Red (2)

These are the Rubber Tires and Wheels for the
Wheelie Bar (TRAC9575) for all Traxxas Maxx series vehicles.

FEATURES:
Tires built of rubber, black in color with with "TRAXXAS"
    composed in white on the sidewalls
Aluminum wheels, anodized red in color

CONSISTS OF:
2 Rubber Tires (TRAC5185) four 5x8mm Ball Bearings, four Axles and
    2 Wheels

NEEDS:
Attaching to wheelie bar