Traxxas Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to prevent vehicle from turning over
    throughout wheelies

INCLUDES:
Assembled optional Wheelie Bar with installing instructions and
    hardware

NEEDS:
Attaching to rear of chassis

You will certainly enjoy this product if you have the product previously stated.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Automobile and Protects the Chassis.

FEATURES:
Durable Plastic Building
Black in Color

INCLUDES:
One Bumper
One Group RPM Decal

NEEDS:
Setup onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This thing compliments the above talked about thing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming capability via Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for use in almost every environment (not planned for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
Four magnet, 4 pole rotor for higher torque
1.4" size slotted stator
Easily removable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery connector of modeler's choice

SPECS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Measurements: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery connector
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)

This thing compliments the above talked about thing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel construction
Natural polished color

INCLUDES:
Twelve Body Clips

SPECS:
Length: 26mm

This is a amazing enhancement to the thing presently being talked about.

Mntd Wheelie Bar Tires/Whls Red (2)

These are the Rubber Tires and Wheels for the
Wheelie Bar (TRAC9575) for all Traxxas Maxx series vehicles.

FEATURES:
Tires constructed of rubber, black in color with with "TRAXXAS"
    written in white on the sidewalls
Aluminum wheels, anodized red in color

INCLUDES:
Two Rubber Tires (TRAC5185) 4 5x8mm Ball Bearings, 4 Axles and
    2 Wheels

NEEDS:
Attaching to wheelie bar