Traxxas Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at back of chassis to avoid car from flipping over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with mounting instructions and
    hardware

NEEDS:
Attaching to back of chassis

You will enjoy this product if you have the product previously discussed.

Wide Front Bumper, For Traxxas Rustler/Stampede/ Nitro Sport/Ban

This is a Wide Front Bumper for the Traxxas Rustler and Stampede.
The Bumper goes on the Front of the Vehicle and Protects the Chassis.

FEATURES:
Durable Plastic Building
Black in Color

INCLUDES:
One Bumper
One Team RPM Decal

NEEDS:
Installation onto the Traxxas Rustler or Stampede.

SPECS:
Length: 2-3/4"
Width: 6-1/8"

REMARKS:
The Factory Number is #81162

This thing praises the above reviewed thing.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) ready to run (not for usage in much heavier
    cars such as E-Revos or E-Maxx class cars)
USB programs capability by means of Castle Link USB adapter (not included,
    order CSEM6300)
Water resistant for usage in almost every environment (not meant for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces lots of stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Change, Instructions, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, 3S LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Rating: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)

This thing praises the above reviewed thing.

Maxx Series Body Clips 12Pc

These are the Body Clips for the Traxxas E-Maxx and T-Maxx Trucks.

FEATURES:
Steel building and construction
Natural refined color

INCLUDES:
Twelve Body Clips

SPECIFICATIONS:
Length: 26mm

This is a wonderful enhancement to the thing presently being reviewed.

Mntd Wheelie Bar Tires/Whls Red (2)

These are the Rubber Tires and Wheels for the
Wheelie Bar (TRAC9575) for all Traxxas Maxx series vehicles.

FEATURES:
Tires constructed of rubber, black in color with with "TRAXXAS"
    composed in white on the sidewalls
Aluminum wheels, anodized red in color

INCLUDES:
2 Rubber Tires (TRAC5185) four 5x8mm Ball Bearings, four Axles and
    2 Wheels

NEEDS:
Connecting to wheelie bar