Traxxas Xl-5 Waterproof Esc With Low Voltage Detection

    This is the Traxxas XL-5 Waterproof Forward/Reverse
Electronic Speed Control.

FEATURES:
EZ-Set pushbutton setup
Efficient low loss MOSFET design with heavy gauge low loss wire
Thermal shutdown protection
Multi-color LED
Training Mode limitations throttle output to 50% for brand-new motorists
Programmable with 3 drive profiles
High capacity heat sink

INCLUDES:
Traxxas XL-5 Forward and Reverse Electronic Speed Control with
    ports and instruction manual

NEEDS:
Linking to motor and battery of car

SPECS:
On Resistance Forward: 0.007 Ohms
On Resistance Reverse: 0.014 Ohms
Peak Current-Fwd/Rev: 100A/60A
Braking Current: 60A
Continous Current: 14A
BEC Voltage: 6.0V DC
BEC Current: 1A
Power Wire: 14AWG/ 5"
Input Harness Type: 26AWG/ 9"
Transistor Type: MOSFET
PWM Frequency: 1600Hz
Thermal Security: Thermal Shutdown
Single Button Setup: Yes
Motor Limitation: 15T (540 Size), 12T (550 Size)
Input Voltage: 4-8 Cells (4.8 to 9.6V DC)
Weight: 3.07oz (87g)
Profile Choice: Sport Mode 100% FWD, 100% Brakes, 100%REV
Race Mode 100% FWD, 100% Brakes, No REV
Training Mode 50% FWD, 100% Brakes, 50% REV

COMMENTS:
**Not suitable with the Novak #5470 2C LiPo Cut-Off Module.**

Often gotten with the item that you are presently checking out.



This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide surface area, gold-plated terminals
Reverse polarity protection makes it difficult to link backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, positive locking spring packed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One Traxxas female connector to Molex male port adapter

COMMENTS:
Molex connector not suitable for high existing usage

Here is a fantastic item that lots of others have actually purchased the same time.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Perfect upgrade for radios discovered in RTR cars
Throttle and steering trim and reverse
Steering double rate dial
Throttle end point change
Channel 3 switch
Throttle fail safe
One year minimal service warranty through Pastime Solutions beginning at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Guideline
    Handbook and On/Off Change

NEEDS:
Servos of modeler's choice
Four AA batteries for transmitter

SPECS:
Transmitter:
Sending Frequency: 2.4GHz band
Power Requirement: Four AA cells
Existing Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Existing Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work correctly when other type of battery is used

COMMENTS:
2.4GHz FHSS is not suitable with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
type of servos or peripherals.
High-Speed mode (in 4PL tx just), with an output of 6.8ms accepts
    digital servos consisting of the BLS series and most peripheral
    devices such as brushless ESCs