Traxxas Xl-5 Waterproof Esc With Low Voltage Detection

    This is the Traxxas XL-5 Waterproof Forward/Reverse
Electronic Speed Control.

FEATURES:
EZ-Set pushbutton setup
Efficient low loss MOSFET design with heavy gauge low loss wire
Thermal shutdown protection
Multi-color LED
Training Mode limits throttle output to 50% for brand-new drivers
Programmable with three drive profiles
High capability heat sink

INCLUDES:
Traxxas XL-5 Forward and Reverse Electronic Speed Control with
    adapters and user's manual

NEEDS:
Linking to motor and battery of vehicle

SPECS:
On Resistance Forward: 0.007 Ohms
On Resistance Reverse: 0.014 Ohms
Peak Current-Fwd/Rev: 100A/60A
Braking Current: 60A
Continous Current: 14A
BEC Voltage: 6.0V DC
BEC Current: 1A
Power Wire: 14AWG/ 5"
Input Harness Type: 26AWG/ 9"
Transistor Type: MOSFET
PWM Frequency: 1600Hz
Thermal Security: Thermal Shutdown
Single Button Setup: Yes
Motor Limitation: 15T (540 Size), 12T (550 Size)
Input Voltage: 4-8 Cells (4.8 to 9.6V DC)
Weight: 3.07oz (87g)
Profile Selection: Sport Mode 100% FWD, 100% Brakes, 100%REV
Race Mode 100% FWD, 100% Brakes, No REV
Training Mode 50% FWD, 100% Brakes, 50% REV

COMMENTS:
**Not compatible with the Novak #5470 2C LiPo Cut-Off Module.**

Regularly acquired with the product that you are currently checking out.



This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES:
Shrouded wire connections (no shrink tube needed)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to link in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for consistent
    contact
Numerous locking barbs keep terminals secure

INCLUDES:
One Traxxas female connector to Molex male connector adapter

COMMENTS:
Molex connector not ideal for high current use

Right here is a terrific product that many others have actually bought at the very same time.



This is the 3-Channel Futaba 3PRKA 2.4GHz FHSS Radio System
with the R203GF Receiver.

FEATURES:
Ideal upgrade for radios discovered in RTR cars
Throttle and steering trim and reverse
Guiding dual rate dial
Throttle end point change
Channel three switch
Throttle fail safe
One year minimal service warranty through Hobby Solutions starting at date
    of purchase

INCLUDES:
Futaba 3PRKA 2.4GHz FHSS Transmitter, R203GF Receiver, Guideline
    Handbook and On/Off Change

NEEDS:
Servos of modeler's option
Four AA batteries for transmitter

SPECS:
Transmitter:
Transferring Frequency: 2.4GHz band
Power Requirement: Four AA cells
Existing Drain: 100mA or less

    Receiver;
Measurements: 1.54 x 1.02 x 0.39" (39 x 26 x 10mm)
Weight: 0.28oz (8g)
Operating Voltage: 4.8 - 7.4V (shared with servo)
Battery Fail Safe Voltage: 3.8V*
Existing Drain: 30mA at no signal
*Battery fail safe voltage is set for 4-cell NiCd/NiMH battery
Battery F/S does not work appropriately when other kind of battery is used

COMMENTS:
2.4GHz FHSS is not compatible with FASST systems.
Normal mode frame rate is (FHSS/S-FHSS) 13.63ms and accepts any
kind of servos or peripherals.
High-Speed mode (in 4PL tx only), with an output of 6.8ms accepts
    digital servos including the BLS series and most peripheral
    devices such as brushless ESCs