Traxxas Ultra Shocks Xxl Grey (2)

This is a set of the Ultra Shocks for the Traxxas T-Maxx 3.3.

FUNCTIONS:
Gray composite bodies
Stock replacement T-Maxx 3.3 unassembled shocks
Preload spacers and two red springs

CONSISTS OF:
2 Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of silicone
    oil and assembly diagram

REQUIRES:
Assembly

REMARKS:
2 sets are needed if replacing all shocks.
Progressive Rate White Springs are likewise readily available, TRAC9557.

Want an additional terrific item to enhance the above pointed out item?

Ultra Shocks Grey Long

This is a set of the Long Ultra Shocks from Traxxas
for the Bandit Extreme.

FEATURES:
Gray composite bodies
Preload spacers and two red springs

CONSISTS OF:
2 ultra long grey shocks with bottle of silicone
    oil and assembly diagram

REQUIRES:
Assembly

REMARKS:
2 sets are needed if replacing all shocks.

This item praises the main item below.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FUNCTIONS:
Made from stainless-steel
This is utilized to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

Get this item to improve the one you read about.

A-Arms, For Maxx, 2.5R & 3.3, Black

These are the RPM Black A-Arms for all versions of the Traxxas T-Maxx.
Optional Arms that change the stock.

FEATURES:
Black in color
Plastic building and construction

CONSISTS OF:
(1) Arm
(1) Lower Arm
(2) RPM Decals

REQUIRES:
Setup, NOTE-four plans are needed to change all A-arms

SPECIFICATIONS:
Length: 5" (127mm)
Width: 3-1/8" (79mm)
Density: 0.33" (8.4mm)

The below item additionally pairs truly well with the item being talked about.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

CONSISTS OF:
Traxxas Titan 550 Motor, two capacitors and two leads with ports

REQUIRES:
Setting up in car

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not offered