Traxxas Ultra Shocks Grey Long

This is a pair of the Long Ultra Shocks from Traxxas
for the Bandit Extreme.

FEATURES:
Gray composite bodies
Preload spacers and two red springs

CONSISTS OF:
2 ultra long grey shocks with bottle of silicone
    oil and assembly diagram

NEEDS:
Assembly

REMARKS:
2 pairs are required if replacing all shocks.

Here is one more thing that compliments the thing being gone over.

Ultra Shocks Xxl Grey (2)

This is a pair of the Ultra Shocks for the Traxxas T-Maxx 3.3.

FEATURES:
Gray composite bodies
Stock replacement T-Maxx 3.3 unassembled shocks
Preload spacers and two red springs

CONSISTS OF:
2 Ultra Shocks for the Traxxas T-Maxx 3.3 with bottle of silicone
    oil and assembly diagram

NEEDS:
Assembly

REMARKS:
2 pairs are required if replacing all shocks.
Progressive Rate White Springs are also offered, TRAC9557.

You will certainly enjoy this thing if you have the thing earlier pointed out.

4Mm Flanged Nylock Nuts (8)

This is the Traxxas Flanged Nylon Locking Nuts.

FEATURES:
Steel serrated building and construction

CONSISTS OF:
Eiqht 4mm flanged nylon locking nuts

SPECS:
Outside size: 7mm

This thing compliments the above gone over thing.

Suspension King Pin 2.5X31.5

This is the Traxxas (TRA) #3740 2.5x31.5mm Pins with E-clips.

FEATURES:
Made from stainless-steel
This is used to hold the front steering block (TRAC9036 #3636)
to the castor block (TRAC9032 #3632) on the electrical
(not Nitro) Rustler
Also called the vertical kingpin

CONSISTS OF:
2 Pins (kingpins)
4 2.5mm e-clips

AXY
9/22/97

This thing compliments the above gone over thing.

Front Bulkhead (Black) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Black nylon building and construction

CONSISTS OF:
One front bulkhead

NEEDS:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following vehicles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede.

Get this thing to enhance the one you are reading about.

Front Bulkhead (Gray) Slash / Bandit / Rustler / Stampede

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
The front suspension arm hinge pins travel through this piece.

FEATURES:
Gray nylon building and construction

CONSISTS OF:
One front bulkhead

NEEDS:
Absolutely nothing. This is a direct replacement part.

SPECS:
Length: 73.6mm (2.90")
Width: 41mm (1.62")
Height: 29mm (1.14")

REMARKS:
This part is used on the following vehicles:
    Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
    Rustler XL and Stampede XL.