Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
2 61mm (96mm center to center) turnbuckles

REQUIRES:
Setup on the automobile

Want another excellent thing to enhance the above pointed out thing?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
2 rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Setup on the automobile

This thing praises the above reviewed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outdoors size: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the above reviewed thing.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Rear Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

SUCHES AS:
2 rear arms
One Proline decal

REQUIRES:
Setup onto automobile

Frequently acquired with the thing that you are presently reading about.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Rear

SUCHES AS:
2 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

REQUIRES:
Assembly onto Car

Get this thing to boost the one you are reading around.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

REQUIRES:
Setup on the automobile

Right here is another thing that praises the thing being reviewed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

Several others have acquired this thing together with the thing that you are presently reading about.

Large Servo Saver

This is a big servo saver that can be used in Traxxas automobiles or any vehicle that
needs a big design servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that permit you to mount the saver
on the majority of popular servos suching as: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the guiding linkages.

This thing is regularly acquired with the above pointed out thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93