Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

Want another fantastic thing to enhance the above discussed thing?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Installation on the vehicle

This thing praises the above discussed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the above discussed thing.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Back Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

INCLUDES:
Two rear arms
One Proline decal

NEEDS:
Installation onto vehicle

Frequently purchased with the thing that you are presently checking out.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends
Can be Used on Front or Back

INCLUDES:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

NEEDS:
Assembly onto Automobile

Get this thing to improve the one you read around.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building
Silver and Black in Color
Put together w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and direction
    sheet

NEEDS:
Installation on the vehicle

Right here is another thing that praises the thing being discussed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

NEEDS:
Installation on vehicle

Numerous others have purchased this thing in addition to the thing that you are presently checking out.

Large Servo Saver

This is a big servo saver that can be utilized in Traxxas vehicles or any automobile that
requires a big design servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 big servo saver and 3 adaptors that enable you to mount the saver
on many popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also consisted of is a mounting screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.

This thing is regularly purchased with the above discussed thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that link the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93