Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Hyperlinks
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
Two 61mm (96mm center to center) turnbuckles

NEEDS:
Setup on the car

Want another fantastic thing to match the above pointed out thing?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Hyperlinks
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
Two rear 49mm (82mm center to center) turnbuckles

NEEDS:
Setup on the car

This thing praises the above discussed thing.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt shields

SUCHES AS:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside diameter: 3/16" (5mm)
Outdoors diameter: 7/16" (11mm)
Width: 5/32" (4mm)

This thing praises the above discussed thing.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Rear Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Boosts forward acceleration, corner speed, consistency and
    drivability

SUCHES AS:
Two rear arms
One Proline decal

NEEDS:
Setup onto car

Regularly bought with the thing that you are presently reviewing.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Hyperlinks
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends
Can be Utilized on Front or Rear

SUCHES AS:
Two 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

NEEDS:
Assembly onto Vehicle

Get this thing to improve the one you are reading around.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Hyperlinks
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Construction
Silver and Black in Color
Put together w/Rod Ends

SUCHES AS:
Two front 39mm (69mm center to center) turnbuckles and instruction
    sheet

NEEDS:
Setup on the car

Here is another thing that praises the thing being discussed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Sturdy Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building and construction

SUCHES AS:
Rear driveshaft assembly
Screw pin

NEEDS:
Setup on car

Lots of others have actually bought this thing along with the thing that you are presently reviewing.

Large Servo Saver

This is a large servo saver that can be used in Traxxas automobiles or any vehicle that
requires a large style servo saver.
FEATURES:
Difficult white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that permit you to mount the saver
on the majority of popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise consisted of is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the steering linkages.

This thing is frequently bought with the above pointed out thing.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93