Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
2 61mm (96mm center to center) turnbuckles

REQUIRES:
Setup on the automobile

Want an additional terrific product to match the above pointed out product?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Bandit, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
2 rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Setup on the automobile

This product compliments the above gone over product.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building
Blue rubber dirt shields

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This product compliments the above gone over product.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Kit Back Arms
for usage on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building, black in color
Increases forward velocity, corner speed, consistency and
    drivability

INCLUDES:
2 rear arms
One Proline decal

REQUIRES:
Setup onto automobile

Frequently purchased with the product that you are currently reading about.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Stadium Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Used on Front or Back

INCLUDES:
2 58mm Threaded Rods
Four 3mm Ball Ends
Four 3mm Hollow Balls

REQUIRES:
Assembly onto Car

Get this product to boost the one you read about.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
2 front 39mm (69mm center to center) turnbuckles and instruction
    sheet

REQUIRES:
Setup on the automobile

Here is an additional product that compliments the product being gone over.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Strong Driveshaft Assembly for the Slash 4x4 from Traxxas

FUNCTIONS:
Black plastic and steel building

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Setup on automobile

Numerous others have purchased this product in addition to the product that you are currently reading about.

Large Servo Saver

This is a large servo saver that can be utilized in Traxxas automobiles or any automobile that
needs a large style servo saver.
FEATURES:
Tough white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that allow you to install the saver
on the majority of popular servos including: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Also included is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Diameter: 1"
The servo saver has 6 holes for mounting the guiding linkages.

This product is often purchased with the above pointed out product.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93