Traxxas Turnbuckles Toe Link 61Mm (96Mm Ctr To Ctr) (2) (A Ssemb

These are the Traxxas 61mm Turnbuckle Toe Links
for the Traxxas Stampede.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two 61mm (96mm center to center) turnbuckles

REQUIRES:
Installation on the automobile

Want an additional wonderful item to enhance the above discussed item?

49Mm Turnbuckles Camber Link Rr

These are the Traxxas 49mm Turnbuckle Camber Links
for the Outlaw, Rustler VXL and Stampede VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two rear 49mm (82mm center to center) turnbuckles

REQUIRES:
Installation on the automobile

This item praises the above reviewed item.

5 X 11 X 4Mm Ball Bearing (2) Blue Rubber Shield R Evo

This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo.

FEATURES:
Metal bearing building and construction
Blue rubber dirt guards

INCLUDES:
(2) 5X11mm ball bearings, Part #5116

SPECIFICATIONS:
Inside size: 3/16" (5mm)
Outside size: 7/16" (11mm)
Width: 5/32" (4mm)

This item praises the above reviewed item.

ProTrac Susp Kit Re Arms Slash

This is an optional Pro-Line ProTrac Suspension Set Back Arms
for use on the 1/10 scale Traxxas Slash.

FEAUTRES:
Nylon building and construction, black in color
Increases forward velocity, corner speed, consistency and
    drivability

INCLUDES:
Two rear arms
One Proline decal

REQUIRES:
Installation onto automobile

Frequently acquired with the item that you are currently reviewing.

58Mm Turnbuckles Camber Links (Front Or Rear) (Ass Embled W/

These are the 58mm Turnbuckle Camber Links
for the Traxxas Nitro Jato Arena Truck.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends
Can be Utilized on Front or Back

INCLUDES:
Two 58mm Threaded Rods
4 3mm Ball Ends
4 3mm Hollow Balls

REQUIRES:
Assembly onto Vehicle

Get this item to improve the one you read around.

39Mm Camber Link Turnbuckles (Fr) Slash, Bandit, Stampede

These are the 39mm Turnbuckle Camber Links
for the Traxxas Stampede and Rustler VXL.

FEATURES:
Metal and Nylon Building and construction
Silver and Black in Color
Assembled w/Rod Ends

INCLUDES:
Two front 39mm (69mm center to center) turnbuckles and guideline
    sheet

REQUIRES:
Installation on the automobile

Here is an additional item that praises the item being reviewed.

Drive Shaft Assembly Rear Heavy Duty Stampede 4X4

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas

FEATURES:
Black plastic and steel building and construction

INCLUDES:
Rear driveshaft assembly
Screw pin

REQUIRES:
Installation on automobile

Several others have actually acquired this item along with the item that you are currently reviewing.

Large Servo Saver

This is a big servo saver that can be used in Traxxas vehicles or any car that
requires a big design servo saver.
FEATURES:
Hard white plastic construction.
INCLUDES:
1 large servo saver and 3 adaptors that enable you to install the saver
on the majority of popular servos suching as: Futaba, Hobbico, Tower, Airtronics,
and Traxxas. Likewise suched as is an installing screw.
SPECIFICATIONS:
Length: 1-3/8"
Size: 1"
The servo saver has 6 holes for mounting the steering linkages.

This item is regularly acquired with the above discussed item.

Hex Hubs & Axle Pins Slash

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet,
Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the
rear wheels to the axles.

INCLUDES:
2- plastic hex collars (wheel adapters)
4- stub axle pins

WAJ
1/16/93