Traxxas TRX-4 SPORT ASSEMBLY KIT:

Easy to follow full-color assembly handbook
True-to-scale part illustrations and ruler charts
Helpful assembly tips and clear illustrations
Clear TRX-4® Sport body
Body comes pre-cut and prepared to mount
Consists of window masking and decals
Includes Expedition Rack with scale accessories
Front grille and rear tail gate with lenses for LED lights
Rugged front and rear bumpers with red D-rings
(Needs polycarbonate paint)
Portal Axles
Increase ground clearance
Eliminate torque twist
Steel equipments
Enhance axle geometry and decrease pressure on driveshafts
Stiff Steel Frame
1.5 mm thick steel frame rails increase torsional rigidity
Ingenious style enables 4 wheelbase positions (300 mm, 312 mm (requirement), 324 mm, 336 mm)
Adjustable rear shock tower positions
Bumpers change fore and aft
Rugged rock rails change for width
Wire routing clips incorporated into frame rails
Drivetrain
Full-time shaft driven 4-wheel drive
Tough 6 mm stub axles
Steel front CV driveshafts
Hardened steel rear axle shafts
Steel equipment transfer case
Ingenious Battery Compartments
Hinged battery strap enables quick and simple battery gain access to
No pins to lose
Accommodates various height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Transmission
Single-speed with steel equipments
Twin friction plate slipper clutch
Easily eliminated for servicing
Steering
Accepts basic size servos
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry fixed for bump guide
Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Pre-assembled heavy-duty rod ends with steel hollow balls
5 mm size steel link rods with 4 mm threaded ends
Pre-assembled aluminum GTS Shocks
Coilover GTS shocks exclusive to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly change flight height
Silky smooth damping for the most difficult tracks
O-ring cap seal and dual X-ring shaft seals
Shock oil consisted of in kit
Wheels and Tires
1.9" Canyon Path tires with trail-tuned foam inserts
Tough black scale wheels
Path tuned S1 rubber substance
12 mm steel hex
Tire glue required
Patented O-Ring sealed watertight receiver box keeps micro receivers dry
Sealed Ball Bearings
Hex hardware with rust-resistant black oxide finishing
Specifications
Length: 21.93 inches (557 mm)
Front Track: 9.78 inches (249 mm)
Rear Track: 9.78 inches (249 mm)
Ground Clearance: 3.14 inches (80 mm)
Weight: 92.6 ounces (2.63 kg) (with electronic devices set up)
Height: 9.47 inches (241 mm)
Wheelbase: 12.28 inches (312 mm)
Front Shock Length: 3.54 inches (90 mm)
Rear Shock Length: 3.54 inches (90 mm)
Technique Angle: 58.82°
Departure Angle: 45.83°
Breakover Angle: 59°
Front Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Front Tires: 4.64 x 1.89 inches (118 x 48 mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48 mm)
Wheel Hex: 12 mm
Speed Control: Offered independently
Motor (electrical): Offered independently
Differential Type: Spindle (no differential)
Transmission: Single speed
Gear Pitch: 32
Chassis
Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers
Drive System: Shaft-Driven 4WD
Radio System: Offered independently
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26 mm H