Traxxas TRX-4 SPORT ASSEMBLY KIT:

Easy to follow full-color assembly handbook
True-to-scale part illustrations and ruler charts
Practical assembly suggestions and clear illustrations
Clear TRX-4® Sport body
Body comes pre-cut and ready to install
Consists of window masking and decals
Consists Of Exploration Rack with scale devices
Front grille and rear tail gate with lenses for LED lights
Rugged front and rear bumpers with red D-rings
(Requires polycarbonate paint)
Portal Axles
Increase ground clearance
Get rid of torque twist
Steel gears
Enhance axle geometry and minimize strain on driveshafts
Stiff Steel Frame
1.5 mm thick steel frame rails increase torsional rigidity
Ingenious style enables four wheelbase positions (300 mm, 312 mm (standard), 324 mm, 336 mm)
Adjustable rear shock tower positions
Bumpers change fore and aft
Rugged rock rails change for width
Wire routing clips integrated into frame rails
Drivetrain
Full-time shaft driven 4-wheel drive
Tough 6 mm stub axles
Steel front CV driveshafts
Hardened steel rear axle shafts
Steel equipment transfer case
Ingenious Battery Compartments
Hinged battery strap enables quick and easy battery gain access to
No pins to lose
Accommodates various height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Transmission
Single-speed with steel gears
Twin friction plate slipper clutch
Easily eliminated for servicing
Steering
Accepts standard size servos
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry remedied for bump steer
Suspension
Front - 3 relate to panhard
Rear - Triangulated 4 link
Pre-assembled durable rod ends with steel hollow balls
5 mm diameter steel link rods with 4 mm threaded ends
Pre-assembled aluminum GTS Shocks
Coilover GTS shocks special to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly change ride height
Silky smooth damping for the most difficult routes
O-ring cap seal and dual X-ring shaft seals
Shock oil consisted of in package
Wheels and Tires
1.9" Canyon Trail tires with trail-tuned foam inserts
Tough black scale wheels
Trail tuned S1 rubber compound
12 mm steel hex
Tire glue required
Trademarked O-Ring sealed watertight receiver box keeps micro receivers dry
Sealed Ball Bearings
Hex hardware with rust-resistant black oxide covering
Specs
Length: 21.93 inches (557 mm)
Front Track: 9.78 inches (249 mm)
Rear Track: 9.78 inches (249 mm)
Ground Clearance: 3.14 inches (80 mm)
Weight: 92.6 ounces (2.63 kg) (with electronics installed)
Height: 9.47 inches (241 mm)
Wheelbase: 12.28 inches (312 mm)
Front Shock Length: 3.54 inches (90 mm)
Rear Shock Length: 3.54 inches (90 mm)
Approach Angle: 58.82°
Departure Angle: 45.83°
Breakover Angle: 59°
Front Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Front Tires: 4.64 x 1.89 inches (118 x 48 mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48 mm)
Wheel Hex: 12 mm
Speed Control: Sold individually
Motor (electric): Sold individually
Differential Type: Spindle (no differential)
Transmission: Single speed
Equipment Pitch: 32
Chassis
Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers
Drive System: Shaft-Driven 4WD
Radio System: Sold individually
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26 mm H