Traxxas TRX-4 SPORT ASSEMBLY KIT:

Easy to follow full-color assembly handbook
True-to-scale part illustrations and ruler charts
Helpful assembly pointers and clear illustrations
Clear TRX-4® Sport body
Body comes pre-cut and all set to install
Includes window masking and decals
Consists Of Exploration Rack with scale devices
Front grille and rear tail gate with lenses for LED lights
Rugged front and rear bumpers with red D-rings
(Requires polycarbonate paint)
Portal Axles
Increase ground clearance
Get rid of torque twist
Steel equipments
Improve axle geometry and minimize pressure on driveshafts
Stiff Steel Frame
1.5 mm thick steel frame rails increase torsional rigidity
Innovative style permits four wheelbase positions (300 mm, 312 mm (standard), 324 mm, 336 mm)
Adjustable rear shock tower positions
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips incorporated into frame rails
Drivetrain
Full-time shaft driven 4-wheel drive
Hard 6 mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Steel gear transfer case
Innovative Battery Compartments
Hinged battery strap permits fast and simple battery access
No pins to lose
Accommodates various height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Transmission
Single-speed with steel equipments
Twin friction plate slipper clutch
Quickly eliminated for maintenance
Steering
Accepts basic size servos
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry corrected for bump steer
Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Pre-assembled heavy-duty rod ends with steel hollow balls
5 mm size steel link rods with 4 mm threaded ends
Pre-assembled aluminum GTS Shocks
Coilover GTS shocks unique to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars easily adjust trip height
Silky smooth damping for the most difficult routes
O-ring cap seal and dual X-ring shaft seals
Shock oil included in package
Wheels and Tires
1.9" Canyon Trail tires with trail-tuned foam inserts
Hard black scale wheels
Trail tuned S1 rubber substance
12 mm steel hex
Tire glue needed
Trademarked O-Ring sealed water tight receiver box keeps micro receivers dry
Sealed Ball Bearings
Hex hardware with rust-resistant black oxide finish
Specifications
Length: 21.93 inches (557 mm)
Front Track: 9.78 inches (249 mm)
Rear Track: 9.78 inches (249 mm)
Ground Clearance: 3.14 inches (80 mm)
Weight: 92.6 ounces (2.63 kg) (with electronics set up)
Height: 9.47 inches (241 mm)
Wheelbase: 12.28 inches (312 mm)
Front Shock Length: 3.54 inches (90 mm)
Rear Shock Length: 3.54 inches (90 mm)
Approach Angle: 58.82°
Departure Angle: 45.83°
Breakover Angle: 59°
Front Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26 mm)
Front Tires: 4.64 x 1.89 inches (118 x 48 mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48 mm)
Wheel Hex: 12 mm
Speed Control: Offered separately
Motor (electric): Offered separately
Differential Type: Spindle (no differential)
Transmission: Single speed
Gear Pitch: 32
Chassis
Structure/Material: Steel Ladder Frame with Nylon Composite Crossmembers
Drive System: Shaft-Driven 4WD
Radio System: Offered separately
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26 mm H