Traxxas TRX-4 SPORT 4WD - TAN

Maker Description

Functions
Difficult, Light-weight Pickup Truck Body
Low profile bumpers for increased clearance
Red differential covers and D-rings
Trail-Tuned XL-5 HV Water Resistant Electronic Speed Control
Completely waterproof style
Five drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Trail Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instantaneous reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, effective heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
2 phase low voltage defense (LVD)
Motor
Powerful TitanT 21T reverse rotation motor with internal cooling fan
Accurate preset gear mesh modifications
Motor retention different from gear mesh
Website Axles
Increase ground clearance
Eliminate torque twist
Steel equipments
Enhance axle geometry and minimize stress on driveshafts

Stiff Steel Frame
1.5mm thick steel frame rails increase torsional rigidity
Innovative style allows 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers change fore and aft
Rugged rock rails change for width
Wire routing clips incorporated into frame rails
Drivetrain
Full-time shaft driven 4-wheel drive
Difficult 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Spool-locked front and rear differentials
Steel gear transfer case
Innovative Battery Compartment
Hinged battery strap allows quick and easy battery access
No pins to lose
Accommodates different height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Transmission
Single-speed with steel equipments
Dual horizontal shafts
Twin friction plate slipper clutch
Easily eliminated for servicing

Steering
Chassis installed 2075X metal gear digital servo
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry corrected for bump guide
Suspension
Front - 3 link with panhard
Rear - triangulated 4 link
Sturdy rod ends with steel hollow balls
5mm size steel link rods with 4mm threaded ends
Aluminum GTS Shocks
Oil-filled coilover GTS shocks special to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly change flight height
Silky smooth damping for the hardest routes
O-ring cap seal and dual X-ring shaft seals
Wheels and Tires
Rugged black 5-spoke wheels
Pre-mounted 1.9" Canyon Trail tires with trail-tuned foam inserts
Trail tuned S1 rubber substance
12mm steel hex
TQT 2.4GHz 2-channel transmitter
Patented O-Ring Sealed Watertight Receiver Box Keeps the Micro Receiver Dry
Sealed Ball Bearings
Hex Hardware with Rust-Resistant Black Oxide Finishing

Specs
Length: 21.93 inches (557mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 5.79pound (2.63kg)
Height: 9.47 inches (241mm)
Wheelbase: 12.28 inches (312mm)
Approach Angle: 58.82°
Departure Angle: 45.83°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Back Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Back Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electric): 21T Reverse Rotation
Transmission: Single Speed
Gear Pitch: 32P
Differential Type: Spindle (no differential)
Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQT 2.4GHz 2-Channel Transmitter
Receiver: 6519
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H