Traxxas TRX-4 Ford Bronco: Sunset

Formally Accredited Ford Bronco Body
Scale details: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Authentic decal sheet
Full Nylon composite wheel wells and flooring pans
Extra scale devices offered separately

Trail-tuned XL-5 HV Waterproof Electronic Speed Control
Completely waterproof design
Five drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (trademarked)
Path Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instant reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, efficient heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
2 phase low voltage protection (LVD)

Motor
Effective TitanT 21T reverse rotation motor with internal cooling fan
Accuracy, predetermined gear mesh adjustments
Motor retention separate from gear mesh

Website Axles
Boost ground clearance
Eliminate torque twist
Steel gears
Enhance axle geometry and reduce pressure on driveshafts

Stiff Steel Frame
1.5mm thick steel frame rails increase torsional rigidity
Ingenious design permits 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips integrated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Difficult 6mm stub axles
Steel front CV driveshafts
Hardened steel rear axle shafts
Remote locking steel gear differentials with cable-actuation
Steel gear transfer case

Ingenious Battery Compartment
Hinged battery strap permits fast and easy battery gain access to
No pins to lose
Accommodates various height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller 1/16 scale batteries (with optional strap)

Transmission
2 speed high/low variety with remote moving
Double horizontal shafts
Twin friction plate slipper clutch
Easily gotten rid of for maintenance

Steering
Chassis mounted 2075X metal gear digital servo
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry corrected for bump guide

Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Durable rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks special to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars easily adjust flight height
Silky smooth damping for the most difficult tracks
O-ring cap seal and double X-ring shaft seals

Wheels and Tires
Reproduction chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Path tires with trail-tuned foam inserts
Path tuned S1 rubber compound
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link enabled
Telemetry all set #6533 5-channel micro receiver with failsafe
Instantly shops and loads settings for as much as 30 Traxxas Link enabled models
Unique Cruise Control function for prolonged trail driving
Adjustable steering and throttle sensitivity (rapid)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Patented O-ring sealed leak-proof receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide coating

Specifications
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42lb (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Method Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electric): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Gear Pitch: 32P
Differential Type: 4 Gear, Remote Locking
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H