Traxxas TRX-4 Ford Bronco: Sunset

Formally Certified Ford Bronco Body
Scale details: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Authentic decal sheet
Full Nylon composite wheel wells and floor pans
Extra scale accessories sold individually

Trail-tuned XL-5 HV Waterproof Electronic Speed Control
Totally water resistant design
5 drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (trademarked)
Path Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instant reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, efficient heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
2 phase low voltage defense (LVD)

Motor
Effective TitanT 21T reverse rotation motor with internal cooling fan
Accuracy, pre-programmed equipment mesh modifications
Motor retention different from equipment mesh

Website Axles
Boost ground clearance
Remove torque twist
Steel equipments
Improve axle geometry and lower stress on driveshafts

Stiff Steel Frame
1.5mm thick steel frame rails increase torsional rigidity
Innovative design permits four wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers change fore and aft
Rugged rock rails change for width
Wire routing clips incorporated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Tough 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Remote locking steel equipment differentials with cable-actuation
Steel equipment transfer case

Innovative Battery Compartment
Hinged battery strap permits fast and easy battery gain access to
No pins to lose
Accommodates different height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller sized 1/16 scale batteries (with optional strap)

Transmission
2 speed high/low variety with remote shifting
Dual horizontal shafts
Twin friction plate slipper clutch
Easily eliminated for servicing

Steering
Chassis installed 2075X metal equipment digital servo
Superior 45° steering angle
Direct steering (no servo saver)
Steering geometry corrected for bump guide

Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Sturdy rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks special to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly change flight height
Silky smooth damping for the most difficult tracks
O-ring cap seal and double X-ring shaft seals

Wheels and Tires
Replica chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Path tires with trail-tuned foam inserts
Path tuned S1 rubber compound
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link enabled
Telemetry prepared #6533 5-channel micro receiver with failsafe
Instantly shops and loads settings for as much as 30 Traxxas Link enabled designs
Unique Cruise Control function for prolonged path driving
Adjustable steering and throttle level of sensitivity (rapid)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Trademarked O-ring sealed water tight receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide covering

Specs
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42pound (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Technique Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Back Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Back Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electrical): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Equipment Pitch: 32P
Differential Type: 4 Equipment, Remote Locking
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Equipment
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H