Traxxas TRX-4 Ford Bronco: Sunset

Officially Accredited Ford Bronco Body
Scale information: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Authentic decal sheet
Full Nylon composite wheel wells and flooring pans
Additional scale devices sold independently

Trail-tuned XL-5 HV Water Resistant Electronic Speed Control
Totally water resistant style
Five drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Path Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instant reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, effective heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
2 phase low voltage defense (LVD)

Motor
Effective TitanT 21T reverse rotation motor with internal cooling fan
Precision, predetermined gear mesh adjustments
Motor retention separate from gear mesh

Website Axles
Boost ground clearance
Remove torque twist
Steel gears
Improve axle geometry and decrease pressure on driveshafts

Rigid Steel Frame
1.5mm thick steel frame rails increase torsional rigidity
Innovative style permits 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB configurations
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips integrated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Hard 6mm stub axles
Steel front CV driveshafts
Hardened steel rear axle shafts
Remote locking steel gear differentials with cable-actuation
Steel gear transfer case

Innovative Battery Compartment
Hinged battery strap permits quick and easy battery gain access to
No pins to lose
Accommodates various height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller sized 1/16 scale batteries (with optional strap)

Transmission
2 speed high/low variety with remote moving
Double horizontal shafts
Twin friction plate slipper clutch
Quickly gotten rid of for maintenance

Steering
Chassis installed 2075X metal gear digital servo
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry corrected for bump guide

Suspension
Front - 3 relate to panhard
Rear - Triangulated 4 link
Heavy-duty rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks unique to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly adjust trip height
Silky smooth damping for the toughest routes
O-ring cap seal and double X-ring shaft seals

Wheels and Tires
Reproduction chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Path tires with trail-tuned foam inserts
Path tuned S1 rubber compound
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link enabled
Telemetry prepared #6533 5-channel micro receiver with failsafe
Instantly shops and loads settings for approximately 30 Traxxas Link enabled designs
Exclusive Cruise Control function for extended path driving
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Trademarked O-ring sealed watertight receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide coating

Specifications
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42lb (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Approach Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Back Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Back Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electrical): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Equipment Pitch: 32P
Differential Type: 4 Equipment, Remote Locking
Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Equipment
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Ability Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H