Traxxas TRX-4 Ford Bronco: Sunset

Formally Licensed Ford Bronco Body
Scale details: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Authentic decal sheet
Full Nylon composite wheel wells and flooring pans
Additional scale devices offered independently

Trail-tuned XL-5 HV Water Resistant Electronic Speed Control
Totally water resistant design
5 drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (trademarked)
Path Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / immediate reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, efficient heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
Two phase low voltage defense (LVD)

Motor
Effective TitanT 21T reverse rotation motor with internal cooling fan
Precision, preset equipment mesh adjustments
Motor retention separate from equipment mesh

Website Axles
Increase ground clearance
Eliminate torque twist
Steel equipments
Enhance axle geometry and reduce pressure on driveshafts

Stiff Steel Frame
1.5mm thick steel frame rails increase torsional rigidness
Ingenious design enables 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB configurations
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips incorporated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Tough 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Remote locking steel equipment differentials with cable-actuation
Steel equipment transfer case

Ingenious Battery Compartment
Hinged battery strap enables fast and easy battery access
No pins to lose
Accommodates different height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller sized 1/16 scale batteries (with optional strap)

Transmission
Two speed high/low range with remote shifting
Double horizontal shafts
Twin friction plate slipper clutch
Quickly eliminated for servicing

Steering
Chassis mounted 2075X metal equipment digital servo
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry fixed for bump guide

Suspension
Front - 3 relate to panhard
Rear - Triangulated 4 link
Durable rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks unique to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly adjust trip height
Silky smooth damping for the most difficult trails
O-ring cap seal and dual X-ring shaft seals

Wheels and Tires
Reproduction chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Path tires with trail-tuned foam inserts
Path tuned S1 rubber substance
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link enabled
Telemetry all set #6533 5-channel micro receiver with failsafe
Automatically shops and loads settings for approximately 30 Traxxas Link enabled models
Unique Cruise Control function for prolonged trail driving
Adjustable steering and throttle sensitivity (rapid)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Trademarked O-ring sealed leak-proof receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide covering

Specs
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42pound (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Approach Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electric): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Equipment Pitch: 32P
Differential Type: 4 Equipment, Remote Locking
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Equipment
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H