Traxxas TRX-4 Ford Bronco: Sunset

Formally Accredited Ford Bronco Body
Scale information: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Genuine decal sheet
Full Nylon composite wheel wells and floor pans
Additional scale devices offered individually

Trail-tuned XL-5 HV Water Resistant Electronic Speed Control
Fully waterproof design
5 drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Path Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instant reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Big, effective heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
Two phase low voltage defense (LVD)

Motor
Powerful TitanT 21T reverse rotation motor with internal cooling fan
Precision, predetermined gear mesh adjustments
Motor retention different from gear mesh

Website Axles
Increase ground clearance
Eliminate torque twist
Steel gears
Improve axle geometry and reduce strain on driveshafts

Rigid Steel Frame
1.5mm thick steel frame rails increase torsional rigidness
Innovative design allows 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips incorporated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Difficult 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Remote locking steel gear differentials with cable-actuation
Steel gear transfer case

Innovative Battery Compartment
Hinged battery strap allows quick and easy battery gain access to
No pins to lose
Accommodates different height batteries
Accepts full-size long battery loads
Integrated compartment accepts smaller sized 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller sized 1/16 scale batteries (with optional strap)

Transmission
Two speed high/low variety with remote moving
Dual horizontal shafts
Twin friction plate slipper clutch
Quickly removed for maintenance

Steering
Chassis installed 2075X metal gear digital servo
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry remedied for bump guide

Suspension
Front - 3 link with panhard
Rear - Triangulated 4 link
Sturdy rod ends with steel hollow balls
5mm size steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks unique to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars easily adjust flight height
Silky smooth damping for the most difficult tracks
O-ring cap seal and double X-ring shaft seals

Wheels and Tires
Replica chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Path tires with trail-tuned foam inserts
Path tuned S1 rubber substance
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link allowed
Telemetry ready #6533 5-channel micro receiver with failsafe
Instantly shops and loads settings for up to 30 Traxxas Link allowed designs
Exclusive Cruise Control function for extended path driving
Adjustable steering and throttle level of sensitivity (exponential)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Patented O-ring sealed leak-proof receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide coating

Specifications
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42lb (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Method Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Back Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Back Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electrical): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Moving
Gear Pitch: 32P
Differential Type: 4 Gear, Remote Locking
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H