Traxxas TRX-4 Ford Bronco: Sunset

Formally Accredited Ford Bronco Body
Scale information: grill, chrome bumpers, side mirrors, chrome side trim, and wipers
Clear front and side windows
Authentic decal sheet
Full Nylon composite wheel wells and floor pans
Additional scale accessories offered independently

Trail-tuned XL-5 HV Waterproof Electronic Speed Control
Completely water resistant design
Five drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake / no reverse
Training ModeT - 50% forward / 100% brake / 50% reverse (patented)
Path Mode - forward / brake / reverse / with trail-tuned drag brake in neutral
Crawl Mode - forward / instantaneous reverse - no neutral with 100% hill holding brake
Traxxas EZ-Set® one-button setup
Large, efficient heat sink
Wide voltage latitude 6-7 cell NiMH (7.2-8.4V) and 2-3s LiPo (7.4-11.1V)
Two phase low voltage protection (LVD)

Motor
Effective TitanT 21T reverse rotation motor with internal cooling fan
Precision, predetermined equipment mesh modifications
Motor retention separate from equipment mesh

Portal Axles
Increase ground clearance
Get rid of torque twist
Steel equipments
Improve axle geometry and decrease strain on driveshafts

Rigid Steel Frame
1.5mm thick steel frame rails increase torsional rigidness
Ingenious design enables 4 wheelbase positions (300mm, 312mm, 324mm, 336mm)
Adjustable rear shock tower positions for SWB and LWB setups
Bumpers adjust fore and aft
Rugged rock rails adjust for width
Wire routing clips incorporated into frame rails

Drivetrain
Full-time shaft driven 4-wheel drive
Tough 6mm stub axles
Steel front CV driveshafts
Solidified steel rear axle shafts
Remote locking steel equipment differentials with cable-actuation
Steel equipment transfer case

Ingenious Battery Compartment
Hinged battery strap enables quick and simple battery gain access to
No pins to lose
Accommodates various height batteries
Accepts full-size long battery packs
Integrated compartment accepts smaller 1/16 scale batteries (with optional strap)
Secondary front battery tray accepts smaller 1/16 scale batteries (with optional strap)

Transmission
Two speed high/low range with remote moving
Double horizontal shafts
Twin friction plate slipper clutch
Quickly removed for servicing

Steering
Chassis mounted 2075X metal equipment digital servo
Superior 45° guiding angle
Direct steering (no servo saver)
Steering geometry corrected for bump guide

Suspension
Front - 3 relate to panhard
Rear - Triangulated 4 link
Heavy-duty rod ends with steel hollow balls
5mm diameter steel link rods with 4mm threaded ends

Aluminum GTS Shocks
Oil-filled coilover GTS shocks special to TRX-4 chassis
Silver-anodized aluminum bodies
Threaded bodies with collars quickly adjust trip height
Silky smooth damping for the toughest routes
O-ring cap seal and dual X-ring shaft seals

Wheels and Tires
Replica chrome wheels with hub inserts
Pre-mounted 1.9" Canyon Path tires with trail-tuned foam inserts
Path tuned S1 rubber substance
12mm steel hex

Transmitter
TQiT 2.4GHz 4-channel transmitter
Traxxas Link allowed
Telemetry ready #6533 5-channel micro receiver with failsafe
Immediately stores and loads settings for up to 30 Traxxas Link allowed designs
Exclusive Cruise Control feature for extended trail driving
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle endpoints
High 13ms frame rate and near-zero latency for responsive control
Patented O-ring sealed leak-proof receiver box keeps the micro receiver dry

Sealed Ball Bearings

Hex hardware with rust-resistant black oxide coating

Specs
Length: 20.57 inches (523mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.42pound (2.91kg)
Height: 10.47 inches (266mm)
Wheelbase: 12.28 inches (312mm)
Approach Angle: 63.82°
Departure Angle: 43.22°
Breakover Angle: 58.93°
Front Shock Length: 3.54 inches (90mm)
Back Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Back Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electrical): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Moving
Equipment Pitch: 32P
Differential Type: 4 Equipment, Remote Locking
Chassis Structure / Product: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic "Hill Hold"
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Equipment
Transmitter: TQiT 2.4 GHz 4-Channel Transmitter
Receiver: 6533
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H