Traxxas Transmitter Antenna

TRAXXAS
RADIO ACCESSORIES Traxxas replacement and optional parts are
offered for your radio system. listed below for stock numbers, descriptions,
and prices. See the ""Intro to Radios'' details fo an
explanation of the usages for these items.

This item is often gotten with the above pointed out item.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor supplied with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and ports

INCLUDES:
Traxxas Titan 550 Motor, 2 capacitors and 2 leads with ports

REQUIRES:
Setting up in car

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not provided

Right here is a terrific item that numerous others have actually bought at the very same time.



This is the Traxxas Male Connector to Molex Female Connector Adapter.

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to link in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring packed terminals for consistent
    contact
Several locking barbs keep terminals secure

INCLUDES:
One Traxxas male adapter to Molex female port adapter

REMARKS:
Molex adapter not suitable for high present use

This item compliments the main item here.



This is the Traxxas Female Connector to Molex Male Connector Adapter.

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity protection makes it difficult to link in reverse
Textured surface for easy gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring packed terminals for consistent
    contact
Several locking barbs keep terminals secure

INCLUDES:
One Traxxas female adapter to Molex male port adapter

REMARKS:
Molex adapter not suitable for high present use

This is a superb enhancement to the item currently being reviewed.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of hardened plastic, black in color
Installs at rear of chassis to prevent car from flipping over
    during wheelies

INCLUDES:
Assembled optional Wheelie Bar with mounting instructions and
    hardware

REQUIRES:
Securing to rear of chassis

Right here is a terrific item that numerous others have actually bought at the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Bandit

The Front axles fit into these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (hub) carriers
Two RPM decals

REQUIRES:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Numerous others have actually gotten this item along with the item that you are currently reading about.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Recommended for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) prepared to run (not for use in heavier
    cars such as E-Revos or E-Maxx class cars)
USB shows ability via Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in almost every environment (not planned for
    operation while immersed in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can changes lots of stock brushed motors
4 magnet, 4 pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Connector,
    On/Off Switch, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

REQUIRES:
Battery adapter of modeler's choice

SPECIFICATIONS:
ESC;
Input Voltage: TWO LiPo minimum, THREE LiPo optimum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery adapter
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Connector: 4mm gold
Wire Length: 9.5" (241mm)