Traxxas Transmitter Antenna

TRAXXAS
RADIO ACCESSORIES Traxxas replacement and optional parts are
available for your radio system. below for stock numbers, descriptions,
and prices. See the ""Intro to Radios'' information fo an
description of the usages for these products.

This thing is frequently purchased with the above discussed thing.

Motor Titan 12T 550 (12-Turns)

    This is the Traxxas Titan 550 12 Turn Electric Motor.

FEATURES:
Stock motor provided with the Traxxas Stampede and Rustler series
Preinstalled leads, capacitors and adapters

INCLUDES:
Traxxas Titan 550 Motor, two capacitors and two leads with adapters

NEEDS:
Installing in car

SPECIFICATIONS:
Can Diameter: 1.25" (38mm)
Shaft Diameter: 0.12" (3mm)
Length Consisting of Shaft: 3.2" (81mm)
Length Not Consisting of Shaft: 2.3" (57.5mm)
Specs such as RPM are not provided

Below is a fantastic thing that many others have actually bought at the very same time.



This is the Traxxas Male Adapter to Molex Female Adapter Adapter.

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One Traxxas male port to Molex female connector adapter

REMARKS:
Molex port not suitable for high present use

This thing praises the main item below.



This is the Traxxas Female Adapter to Molex Male Adapter Adapter.

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide area, gold-plated terminals
Reverse polarity defense makes it impossible to connect backwards
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring crammed terminals for consistent
    contact
Multiple locking barbs keep terminals protect

INCLUDES:
One Traxxas female port to Molex male connector adapter

REMARKS:
Molex port not suitable for high present use

This is a wonderful enhancement to the thing currently being talked about.

Wheelie Bar Assem Stamp/Rust/Bandit

This is an optional Wheelie Bar for the Traxxas
Electric Stampede, Rustler and Bandit.

FEATURES:
Constructed of solidified plastic, black in color
Installs at back of chassis to prevent car from turning over
    throughout wheelies

INCLUDES:
Put together optional Wheelie Bar with installing directions and
    hardware

NEEDS:
Securing to back of chassis

Below is a fantastic thing that many others have actually bought at the very same time.

Front Bearing Carriers, For Slash 2Wd, Nitro Slash, E-Rustler &

These are Optional Front Bearing Providers for the Traxxas Electric
Rustler, Stampede and Outlaw

The Front axles suit these bearing carriers.

FEATURES:
Black nylon building and construction

INCLUDES:
Two Front bearing (center) carriers
Two RPM decals

NEEDS:
(4) 5x11mm bearings, if needed use (2) DTXC1547.

Many others have actually purchased this thing together with the thing that you are currently checking out.



This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control
    and the 1406 Series 4600kV Sensorless Brushless Motor.

FEATURES:
SV3 12V ESC (CSEM0115)
Suggested for all 1/10 scale buggy and truggy applications that
    weigh less than 5lbs (2.25kg) all set to run (not for use in much heavier
    automobiles such as E-Revos or E-Maxx class automobiles)
USB programming ability by means of Castle Link USB adapter (not consisted of,
    order CSEM6300)
Water resistant for use in nearly every environment (not intended for
    operation while submerged in liquid)
Reversible with reverse lockout
    1406 Series 4600kV Motor (CSEC0000)
540 size can replaces numerous stock brushed motors
Four magnet, four pole rotor for higher torque
1.4" diameter slotted stator
Detachable end bell

INCLUDES:
Sidewinder SV3 12V ESC with 13 gauge Battery Wires with Pre-Tinned
    Leads, 4mm Female Bullets for Motor Connection, Receiver Adapter,
    On/Off Change, Guidelines, 4600kV 1406 series Brushless Motor
    with 4mm Male Bullet Connectors

NEEDS:
Battery port of modeler's option

SPECIFICATIONS:
ESC;
Input Voltage: 2S LiPo minimum, THREE LiPo maximum, 9 cell NiCd/NiMH
Brake: Proportional
Reversible: Yes, with lockout
Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)
Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no
    battery port
    Motor;
kV Score: 4600
Can Length: 1.9" (49mm)
Can Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.2mm)
Weight: 5.9 oz (169.5 g)
Adapter: 4mm gold
Wire Length: 9.5" (241mm)